Numerical determination of Paris law constants for carbon steel using a two-scale model
Authors:
Open Access
- 31 May 2017
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 843 (1) , 012042
Abstract
For most engineering alloys, the long fatigue crack growth under a certain stress level can be described by the Paris law. The law provides a correlation between the fatigue crack growth rate (FCGR or da/dN), the range of stress intensity factor (ΔK), and the material constants C and m. A well-established test procedure is typically used to determine the Paris law constants C and m, considering standard specimens, notched and pre-cracked. Definition of all the details necessary to obtain feasible and comparable Paris law constants are covered by standards. However, these cost-expensive tests can be replaced by appropriate numerical calculations. In this respect, this paper deals with the numerical determination of Paris law constants for carbon steel using a two-scale model. A micro-model containing the microstructure of a material is generated using the Finite Element Method (FEM) to calculate the fatigue crack growth rate at a crack tip. The model is based on the Tanaka-Mura equation. On the other side, a macro-model serves for the calculation of the stress intensity factor. The analysis yields a relationship between the crack growth rates and the stress intensity factors for defined crack lengths which is then used to determine the Paris law constants.Keywords
This publication has 15 references indexed in Scilit:
- Automatic procedure for evaluating the Paris Law of martensitic and austenitic stainless steels by means of thermal methodsEngineering Fracture Mechanics, 2016
- Determination of Fatigue Properties Using Miniaturized SpecimensTransactions of the Indian Institute of Metals, 2015
- Determination of the Paris' law constants by means of infrared thermographic techniquesPolymer Testing, 2014
- Determination of the Paris law constants in round bars from beach marks on fracture surfacesEngineering Fracture Mechanics, 2012
- Determination of Paris law constants with a reverse engineering techniqueEngineering Failure Analysis, 2009
- Algorithms for the estimation of fatigue crack growth using energy methodArchives of Civil and Mechanical Engineering, 2009
- The railway accident of Eschede – technical backgroundEngineering Failure Analysis, 2004
- A theory of fatigue crack initiation at inclusionsMetallurgical Transactions A, 1982
- A Dislocation Model for Fatigue Crack InitiationJournal of Applied Mechanics, 1981
- A Critical Analysis of Crack Propagation LawsJournal of Basic Engineering, 1963