Model-Based Friction and Limp Home Compensation In Electronic Throttle Control
Authors:
- 3 April 2006
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
In this paper, we present an estimation of the coulomb friction and return spring effects in an automotive electronic throttle control (ETC) system using a nonlinear model-based estimator. The non-linear model-based estimator smoothly estimates this static non-linear behavior based on a priori knowledge of the feedback signals of the position error and the angular velocity of the throttle plate. Extensive simulations showed that the estimator sufficiently predicts the actual static non-linear behavior. The performance of the estimator was compared to an approximation based on the experimental nonlinear characteristics of the throttle. The non-linear model-based estimator can be used for compensation and can cancel the effect of the static nonlinearity in the throttle actuator to improve throttle position control. To validate how the adaptation of the static nonlinearities can improve the tracking performance, we integrated the estimator as a TargetLink block within the controller into the ETC software using a rapid prototyping real-time system, and tested the position control on an actual electronic throttle body. The control structure with the estimator was simple to implement and was robust in operation. The experimental closed-loop results revealed acceptable position tracking and satisfied requirements for control performance, controller cost, and processor load.Keywords
This publication has 9 references indexed in Scilit:
- Tuning An Electronic Throttle Controllers Using Computer-Aided Calibration MethodSAE International Journal of Advances and Current Practices in Mobility, 2006
- An Electronic Throttle Simulation Model with Automatic Parameter TuningSAE International Journal of Advances and Current Practices in Mobility, 2005
- Engine Torque Mapping Using Computer-Aided CalibrationSAE International Journal of Advances and Current Practices in Mobility, 2005
- An Electronic Throttle Control Strategy Including Compensation of Friction and Limp-Home EffectsIEEE Transactions on Industry Applications, 2004
- Model-Based Analysis and Tuning of Electronic Throttle ControllersSAE International Journal of Advances and Current Practices in Mobility, 2004
- Non-Linear Model-Based Throttle ControlSAE International Journal of Advances and Current Practices in Mobility, 2000
- Tracking control of an electrohydraulic manipulator in the presence of frictionIEEE Transactions on Control Systems Technology, 1998
- On adaptive friction compensationIEEE Transactions on Automatic Control, 1992
- Experimental identification of friction and its compensation in precise, position controlled mechanismsIEEE Transactions on Industry Applications, 1992