Cryogenic performances of T700 and T800 carbon fibre- epoxy laminates
Open Access
- 18 December 2015
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 102 (1) , 012016
Abstract
The temperature dependence of thermal expansion, thermal conductivity and mechanical properties of T700 carbon fibre (T700 CFs) /epoxy composite and T800 CF/epoxy composite were investigated. The mechanical and thermal properties of the unidirectional composite material laminates (0º /90º) at low temperature were studied. The results show that comparing the composite material T700 CFs with T800 CFs, the thermal expansion and thermal conductivity performances of T800 CFs (0º /90º) are all smaller than those of T700 CFs. Typically, the coefficient of thermal expansion (CTE) of T800 CFs in 0º is very low in the temperature range of 120-300K, which reaches as low as-0.4×10-6 K-1. The value of thermal conductivity of this material at 0º is about 3.2 W.(m.K)-1 at room temperature. Tensile and compression tests indicate that the tensile strength of T800 CFs in 0º direction at 77K reaches 2310 MPa, while the compressive strength is about 852 MPa. This composite material may possibly be exploited to design the critical components for practical applications such as hydrogen storage tanks.Keywords
This publication has 17 references indexed in Scilit:
- Carbon fibers and composites with epoxy resins: Topography, fractography and interphasesCarbon, 2004
- Chemical modification of carbon fiber surfacesCarbon, 2002
- An affordable methodology for replacing metallic aircraft panels with advanced compositesComposites Part A: Applied Science and Manufacturing, 2002
- Characterization of the surface and interphase of plasma-treated HM carbon fibresComposites Part A: Applied Science and Manufacturing, 1997
- Interfacial toughness evaluation from the single-fiber fragmentation testComposites Science and Technology, 1996
- Micromechanics Prediction of the Shear Strength of Carbon Fiber/Epoxy Matrix Composites: The Influence of the Matrix and Interface StrengthsJournal of Composite Materials, 1992
- The carbon fibre/epoxy interface—A reviewComposites Science and Technology, 1991
- Effect of surface treatment and sizing of c-fibres on the mechanical properties of cfr thermosetting and thermoplastic polymersCarbon, 1987
- Adhesion of Graphite Fibers to Epoxy Matrices: II. The Effect of Fiber FinishThe Journal of Adhesion, 1983
- Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenumJournal of the Mechanics and Physics of Solids, 1965