Templated Grain Growth of Textured PMN‐28PT Using SrTiO 3 Templates
Open Access
- 7 January 2009
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 92 (s1) , S133-S139
Abstract
Highly textured PMN‐28PT (0.72Pb(Mg 1/3 Nb 2/3 )O 3 –0.28PbTiO 3 ) ceramics were produced by templated grain growth on oriented platelet‐shaped SrTiO 3 template particles with an aspect ratio of 10–15. The templates were aligned in PMN‐28PT matrix powder via tape casting and fired in an O 2 –PbO atmosphere at 1150°C for up to 15 h. This resulted in textured ceramics with a 40 micrometer grain size and without residual templates. The volume fraction of textured material ( f ) and the orientation parameter ( r ) were quantified by fitting X‐ray diffraction rocking curve data to the March–Dollase equation. Processing conditions were optimized to achieve the best possible values of f and r for the chosen templates and matrix powder. A texture fraction of at least 81 vol% and an orientation parameter of 0.2 were achieved when all random matrix grains were consumed (a perfect textured ceramic would show a texture fraction of 100 vol% and an orientation parameter of 0).Keywords
This publication has 25 references indexed in Scilit:
- Texture Measurements in 〈001〉 Fiber‐Oriented PMN–PTJournal of the American Ceramic Society, 2006
- Texture Development in Barium Titanate and PMN–PT Using Hexabarium 17‐Titanate HeterotemplatesInternational Journal of Applied Ceramic Technology, 2005
- Critical evaluation of the Lotgering degree of orientation texture indicatorJournal of Materials Research, 2004
- Large-volume atmosphere-controlled high-temperature x-ray diffraction furnaceMeasurement Science and Technology, 2003
- Kinetics of Templated Grain Growth of 0.65Pb(Mg1/3Nb2/3)O3·0.35PbTiO3Journal of the American Ceramic Society, 2001
- Low‐Temperature Reactive Sintering of 0.65PMN·0.35PTJournal of the American Ceramic Society, 2001
- Epitaxial Growth of Anisotropically Shaped, Single-crystal Particles of Cubic SrTiO3Journal of Materials Research, 2000
- Correction of intensities for preferred orientation in powder diffractometry: application of the March modelJournal of Applied Crystallography, 1986
- Improvements in Atmosphere Sintering of Transparent PLZT CeramicsJournal of the American Ceramic Society, 1973
- Fabrication of Transparent Electrooptic PLZT Ceramics by Atmosphere SinteringJournal of the American Ceramic Society, 1973