Study on Proppant Transport and Placement in Shale Gas Main Fractures
Open Access
Abstract
In this paper, based on the background of a deep shale reservoir, a solid–liquid two-phase flow model suitable for proppant and fracturing fluid flow was established based on the Euler method, and a large-scale fracture model was established. Based on field parameters, a proppant transport experiment was conducted. Then, on the basis of the experimental fracture model, proppant transport simulation under different influencing factors was carried out. The results show that the laboratory experiment was in good agreement with the simulated results. The process of proppant accumulation in fractures can be divided into three stages according to the characteristics of sand banks. The displacement mainly affects the sedimentation distance of the proppant in the first stage, and the viscosity of the fracturing fluid represents the strength of the fluid sand carrying performance. Compared with 40/70 mesh proppant, 70/140 mesh proppant is more easily fluidizable, the fracture width has less influence on proppant migration and placement, and the perforation location only affects the accumulation pattern at the fracture entrance, but has less influence on proppant placement in the remote well zone.Keywords
Funding Information
- SINOPEC Petroleum Exploration and Production Research Institute (2022-KFKT-12)
This publication has 10 references indexed in Scilit:
- Numerical simulation of proppant directly entering complex fractures in shale gasJournal of Natural Gas Science and Engineering, 2022
- A Computational Fluid Dynamics Study of Proppant Placement in Hydraulic Fracture Networks2017
- Laboratory Results of Proppant Transport in Complex Fracture Systems2014
- Proppant Transport in Slick-Water Fracturing of Shale-Gas Formations2009
- Effect of Fracture Width and Fluid Rheology on Proppant Settling and Retardation: An Experimental Study2005
- Evaluation of boundary conditions used to model dilute, turbulent gas/solids flows in a pipePowder Technology, 2005
- Analysis of a frictional–kinetic model for gas–particle flowPowder Technology, 2003
- Discrete particle simulation of two-dimensional fluidized bedPowder Technology, 1993
- Selective Placement of Fluids in a Fracture by Controlling Density and ViscosityJournal of Petroleum Technology, 1976
- The Mechanics of Sand Movement in FracturingJournal of Petroleum Technology, 1959