How does the SDS addition in talc grinding affect its floatability?
Authors:
- 21 July 2021
- journal article
- research article
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 40 (4) , 427-433
Abstract
Talc processing starts with grinding followed by flotation. The flotation feed preparation significantly affects the concentrate quality. In this study, the preparation of talc flotation feed by grinding was investigated in the absence and presence of sodium dodecyl sulfonate (SDS), one of the well-known flotation reagents. The natural floatability of talc was compared to its floatability after adding the SDS in either grinding or flotation. The results proved a significant effect of grinding conditions on its natural floatability. The higher flotation recovery is achieved by grinding at the alkaline medium compared to the acidic medium at 30% solids. More interestingly, adding the SDS in flotation produced a higher talc recovery than that the achieved recovery by its flotation after adding SDS in grinding although it has more chance for mixing the reagent with particles and adsorption of SDS to talc particles. Thus, the tested variables in grinding tests negatively affect the SDS effectiveness as a flotation reagent for talc.Keywords
This publication has 29 references indexed in Scilit:
- A comparison study between sodium dodecyl sulfate and sodium dodecyl sulfonate with respect to the thermodynamic properties, micellization, and interaction with poly(ethylene glycol) in aqueous solutionsThe Journal of Chemical Thermodynamics, 2011
- Influence of pH and Chloride-Based Metal Salts on Coagulation/Dispersion Behavior of Talc SuspensionSeparation Science and Technology, 2011
- Changes of the main physical and technological properties of talc due to mechanical strainApplied Clay Science, 2009
- Correlation of the surface roughness of some industrial minerals with their wettability parametersChemical Engineering and Processing - Process Intensification, 2005
- Influence of the morphogranulometry and hydrophobicity of talc on its antisticking power in the production of tabletsInternational Journal of Pharmaceutics, 2005
- Influence of grinding on the structure and colour properties of talc, bentonite and calcite white fillersClay Minerals, 2004
- The effect of additives on stirred media milling of limestonePowder Technology, 1997
- Effects of Grinding Aids on the Surface Properties of Flaky GraphiteJournal of the Ceramic Society of Japan, 1996
- Physico-chemical aspects of grinding: a review of use of additivesPowder Technology, 1984
- Influence of flotation reagents on the wet grinding of quartzPowder Technology, 1977