Predicting Thermal Contact Resistance Between Molten Metal Droplets and a Solid Surface
Authors:
- 9 June 2005
- journal article
- Published by Wiley in Journal of Heat Transfer
- Vol. 127 (11) , 1269-1275
Abstract
Thermal contact resistance between molten metal droplets (aluminum alloy 380 and bismuth) and solid plates (steel and brass) was measured experimentally. The diameter of the droplets was 4mm, and droplet impact velocity ranged between 1 and 3m∕s. Substrate temperature was varied from 25to300°C and roughness from 0.06to5.0μm. Substrate temperature variation under impacting droplets was measured using fast temperature sensors that had a response time of 40ns and recorded substrate temperatures at five different radial locations under each droplet. Thermal contact resistance during the first few milliseconds of impact was obtained by matching measured surface temperature variation with an analytical solution of the one-dimensional transient heat conduction equation. An analytical model of the deformation of a free liquid surface in contact with a rough solid was used to calculate the true area of contact between them and, thereby, the thermal contact resistance. Test results agreed well with predictions from the analytical model. Thermal contact resistance values ranged from 10−7to3×10−6m2K∕W, increasing with surface roughness and decreasing with rising impact velocity.Keywords
This publication has 8 references indexed in Scilit:
- Producing molten metal droplets with a pneumatic droplet-on-demand generatorJournal of Materials Processing Technology, 2005
- Experimental determination of the interfacial heat transfer during cooling and solidification of molten metal droplets impacting on a metallic substrate: effect of roughness and superheatInternational Journal of Heat and Mass Transfer, 2002
- Splat Shapes in a Thermal Spray Coating Process: Simulations and ExperimentsJournal of Thermal Spray Technology, 2002
- Interfacial thermal conductance in rapid contact solidification processInternational Journal of Heat and Mass Transfer, 2002
- Impact, recoil and splashing of molten metal dropletsInternational Journal of Heat and Mass Transfer, 2000
- Estimation of thermal contact resistance during the first stages of metal solidification process: I—experiment principle and modelisationInternational Journal of Heat and Mass Transfer, 1999
- Thermal analysis and measurements for a molten metal drop impacting on a substrate: cooling, solidification and heat transfer coefficientInternational Journal of Heat and Mass Transfer, 1995
- The true area of contact between a liquid and a rough solid: Elementary considerationsWear, 1982