Improved current control scheme with online current distribution and DFA regulation for switched reluctance generator
Authors:
Open Access
- 2 January 2018
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 12 (3) , 388-397
Abstract
In this study, an improved phase current control scheme (CCS) for switched reluctance generator is developed and evaluated. The objective of proposed CCS is to find the most efficient operating point according to output power command directly and shorten the online tuning process. The CCS is augmented with an online phase current distributing block (OCDB) and a dynamic firing angle regulator (DFAR). In OCDB, phase current is distributed online to minimise copper loss by maximising the average‐torque–ampere ratio. In DFAR, firing angles are processed according to actual phase current and current command. Improvements in current responses by augmenting DFAR are verified by simulations and experiments. In the end, the proposed CCS is employed in an output power controller for practical applications. Experimental results show that the proposed CCS has good dynamic response and finds the most efficient operating point directly.Keywords
This publication has 22 references indexed in Scilit:
- Maximum-Force-per-Ampere Strategy of Current Distribution for Efficiency Improvement in Planar Switched Reluctance MotorsIEEE Transactions on Industrial Electronics, 2015
- Characteristics Analysis of an Excitation Assistance Switched Reluctance Wind Power GeneratorIEEE Transactions on Magnetics, 2015
- A Novel Excitation Assistance Switched Reluctance Wind Power GeneratorIEEE Transactions on Magnetics, 2014
- Maximum Torque Per Ampere (MTPA) Control for Interior Permanent Magnet Synchronous Machine Drives Based on Virtual Signal InjectionIEEE Transactions on Power Electronics, 2014
- Switched Reluctance Generator Control for Optimal Power Generation With Current RegulationIEEE Transactions on Industry Applications, 2013
- Optimisation techniques for a hysteresis current controller to minimise torque ripple in switched reluctance motorsIET Electric Power Applications, 2009
- Optimal turn-off angle control in the face of automatic turn-on angle control for switched-reluctance motorsIET Electric Power Applications, 2007
- Control of a Switched Reluctance Generator for Variable-Speed Wind Energy ApplicationsIEEE Transactions on Energy Conversion, 2005
- Optimizing Performance in Current-Controlled Switched Reluctance GeneratorsIEEE Transactions on Energy Conversion, 2005
- Closed Loop Control of Excitation Parameters for High Speed Switched-Reluctance GeneratorsIEEE Transactions on Power Electronics, 2004