Effect of Fe and Cr Addition on the Sintering Behavior of ZrB 2 Produced by Self‐Propagating High‐Temperature Synthesis
Authors:
- 1 November 2002
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 85 (11) , 2846-2848
Abstract
An investigation of the sintering behavior of ZrB 2 powder with Fe and Cr (0 to 20 wt%) addition was conducted. It was observed that Fe addition helps to enhance the density of ZrB 2 only up to 10 wt%. Further addition of Fe degrades the sintering by segregation of Fe‐rich phases. Formation of a eutectic phase containing a Fe:Zr ratio of 92.57:7.43 was also found in Fe‐added samples. The addition of Cr to a ZrB 2 matrix was found to result in swelling of the samples, leading to several cracks.Keywords
This publication has 8 references indexed in Scilit:
- Sintering studies on ultrafine ZrB2 powder produced by a self-propagating high-temperature synthesis processJournal of Materials Research, 2000
- Pressureless Sintering of Titanium Diboride with Nickel, Nickel Boride, and Iron AdditivesJournal of the American Ceramic Society, 1997
- Synthesis and Analysis of ZrB2-Based CompositesMaterials and Manufacturing Processes, 1996
- SHS Combustion Characteristics of Several Ceramics and Intermetallic CompoundsJournal of the American Ceramic Society, 1994
- Reaction synthesis processes: mechanisms and characteristicsMetallurgical Transactions A, 1992
- Microstructural Properties of Combustion‐Synthesized and Dynamically Consolidated Titanium Boride and Titanium CarbideJournal of the American Ceramic Society, 1990
- Self-propagating exothermic reactions: The synthesis of high-temperature materials by combustionMaterials Science Reports, 1989
- The sintering of combustion-synthesized titanium diborideJournal of Materials Science, 1987