Conductive TiN thin films grown by plasma-enhanced atomic layer deposition: Effects of N-sources and thermal treatments
Authors:
- Clémence BadieCBClémence Badie
- Héloïse TissotHTHéloïse Tissot
- Beniamino SciaccaBSBeniamino Sciacca
- Maïssa K. BarrMBMaïssa K. Barr
- Julien BachmannJBJulien Bachmann
- Christophe ValléeCVChristophe Vallée
- Gaël GautierGGGaël Gautier
- Thomas DefforgeTDThomas Defforge
- Vincent AstieVAVincent Astie
- Jean-Manuel DecamsJDJean-Manuel Decams
- Mikhael BechelanyMikhael Bechelany
- Lionel SantinacciLSLionel Santinacci
- 6 March 2023
- journal article
- research article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 41 (3) , 032401
Abstract
This work consists of optimizing TiN plasma-enhanced atomic layer deposition using two different N-sources: NH 3 and N 2. In addition to maximizing the growth per cycle (GPC) and to shorten the deposition duration, comprehensive in situ and ex situ physicochemical characterizations give valuable information about the influence of the N-source nature, their dilution in Ar, and the plasma power on layer’s final properties. N 2 and NH 3 dilutions within Ar are extensively investigated since they are critical to decreasing the mean free path ( ℓ) of plasma-activated species. A 1:1 gas ratio for the N-sources:Ar mixture associated with low flows (20 sccm) is optimal values for achieving highest GPCs (0.8 Å/cycle). Due to lower reactivity and shorter ℓ of the excited species, N 2 plasma is more sensitive to power and generator-to-sample distance, and this contributes to lower conformality than with NH 3 plasma. The resistivity of the initial amorphous films was high ( ≥ 1000 μ Ω cm) and was significantly reduced after thermal treatment ( ≤ 400 μ Ω cm). This demonstrates clearly the beneficial effect of the crystallinity of the film conductivity. Though N 2 process appears slightly slower than the NH 3 one, it leads to an acceptable film quality. It should be considered since it is nonharmful, and the process could be further improved by using a reactor exhibiting optimized geometry.Keywords
Funding Information
- Agence Nationale de la Recherche (ANR- 17-CE09-0049-03)
This publication has 63 references indexed in Scilit:
- Role of Electrolyte Additives during Electrochemical Etching of Macropore Arrays in Low-Doped SiliconJournal of the Electrochemical Society, 2013
- A Family of Heteroleptic Titanium Guanidinates: Synthesis, Thermolysis, and Surface ReactivityInorganic Chemistry, 2010
- Atomic layer deposition of titanium nitride from TDMAT precursorMicroelectronic Engineering, 2009
- Low-Temperature Low-Resistivity PEALD TiN Using TDMAT under Hydrogen Reducing AmbientJournal of the Electrochemical Society, 2008
- Effects of Interfacial Organic Layers on Nucleation, Growth, and Morphological Evolution in Atomic Layer Thin Film DepositionThe Journal of Physical Chemistry C, 2007
- Stability of Plasma Posttreated TiN Films Prepared by Alternating Cyclic Pulses of Tetrakis-Dimethylamido-Titanium and AmmoniaJapanese Journal of Applied Physics, 2004
- In situ X-ray Photoelectron, Ultraviolet Photoelectron, and Auger Electron Spectroscopy Spectra from First-Row Transition-Metal Nitrides: ScN, TiN, VN, and CrNSurface Science Spectra, 2000
- Comparison of Tetrakis(dimethylamido)titanium and Tetrakis(diethylamido)titanium as Precursors for Metallorganic Chemical Vapor Deposition of Titanium NitrideJournal of the Electrochemical Society, 1999
- Atomic Layer Deposition of TiN Films by Alternate Supply of Tetrakis(ethylmethylamino)-Titanium and AmmoniaJapanese Journal of Applied Physics, 1998
- Atomic Layer Epitaxy Growth of TiN Thin Films from Til4 and NH 3Journal of the Electrochemical Society, 1998