Friction and wear behaviors of polyamide-based composites blended with polyphenylene sulfide
- 5 November 2012
- journal article
- research article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 27 (7) , 977-991
Abstract
Polymer blending has attracted wide concern for modification of polymer materials especially in the tribological field. In this article, the structure, mechanical and tribological properties were investigated carefully for the polyamide-6-based composites blended with polyphenylene sulfide (PA6-PPS). It was found that the composites were partially miscible, and the modulus of PA6 was improved apparently with the addition of PPS. The average friction coefficient of PA6-PPS composites decreased as the content of PPS increased at the stable stage. The friction coefficients and wear rate of the PA6-PPS composites increased under higher load, while the friction coefficient decreased and the wear rate increased at higher sliding speed. Besides, scanning electron micrograph of worn surface morphology revealed the primary wear mechanism of PA6-PPS composites gradually transformed from the micro-cutting wear to adhesive wear and abrasive wear.Keywords
This publication has 20 references indexed in Scilit:
- Structural correlations to sliding wear performance of PA-6/PP-g-MA/nanoclay ternary nanocompositesWear, 2011
- The Friction and Wear Properties of Thermoplastic PA6 Composites Filled with Carbon FiberJournal of Thermoplastic Composite Materials, 2009
- Manipulating the phase morphology in PPS/PA66 blends using clayJournal of Applied Polymer Science, 2007
- Friction, wear and transfer of pure and internally lubricated cast polyamides at various testing scalesWear, 2007
- Tribological behaviours of PA/UHMWPE blend under dry and lubricating conditionWear, 2006
- Wear behavior of carbon fiber‐reinforced poly(phenylene sulfide)Polymer Composites, 2005
- Friction and wear mechanisms of polyamide 66/high density polyethylene blendsJournal of Polymer Science Part B: Polymer Physics, 2005
- Mechanical and tribological properties of PA/PPS blendsWear, 2004
- Friction and wear behaviour of unfilled engineering thermoplasticsMaterials & Design (1980-2015), 2003
- Friction and wear of water lubricated PEEK and PPS sliding contactsWear, 2002