Cutting Force Model for Thermal-Assisted Machining of Tool Steel Based on the Taguchi Method
Open Access
Abstract
This paper investigates cutting force in thermal-assisted machining (TAM) by induction heating for SKD11 tool steel which is widely used in the mold industry. Experimental studies were first conducted at room and elevated temperatures to evaluate the effectiveness of the heating process on chip morphology and the cutting forces during the thermal-assisted machining and comparing with conventional machining method. The Taguchi method based on orthogonal array and analysis of variance ANOVA method was then used to design the number of experiments and evaluate the influence of cutting speed, feed rate, cutting depth, and elevated temperature on the cutting force. Study results showed a decrease in the cutting force in the TAM process. The optimal condition of parameters obtained for thermal-assisted machining were cutting speed 280 m/min, feed rate 230 mm/min, cutting depth 0.5 mm and temperature 400 °C. Finally, a proposed equation was established to determine the cutting force that was presented as a function of elevated temperatures when milling SKD11 material. A proposed cutting force model was compared, evaluated and confirmed to be in good agreement with experimental results.Keywords
Funding Information
- National Foundation for Science and Technology Development (107.02-2016.01)
This publication has 29 references indexed in Scilit:
- A study on the cutting force and chip shrinkage coefficient in high-speed milling of A6061 aluminum alloyThe International Journal of Advanced Manufacturing Technology, 2017
- Simulation and experimental studies to verify the effect of cutting parameters on chip shrinkage coefficient and cutting forces in machining of A6061 aluminum alloyAdvances in Mechanical Engineering, 2016
- Thermally-assisted end milling of titanium alloy Ti-6Al-4V using induction heatingInternational Journal of Machining and Machinability of Materials, 2013
- An Experimental Investigation of Hot Machining with Induction to Improve Ti-5553 MachinabilityApplied Mechanics and Materials, 2011
- Comprehension of chip formation in laser assisted machiningInternational Journal of Machine Tools and Manufacture, 2011
- Laser-assisted Milling of Advanced MaterialsPhysics Procedia, 2011
- The Effect of a Laser Beam on Chip Formation during Machining of Ti6Al4V AlloyMetallurgical and Materials Transactions A, 2010
- Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2Journal of Materials Processing Technology, 2008
- Theoretical and experimental determination of tool life in hot machining of austenitic manganese steelInternational Journal of Machine Tools and Manufacture, 2001
- A computer aided finite element/experimental analysis of induction heating process of steelComputers in Industry, 1996