A 2.02–5.16 fJ/Conversion Step 10 Bit Hybrid Coarse-Fine SAR ADC With Time-Domain Quantizer in 90 nm CMOS
Authors:
- 5 November 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 51 (2) , 357-364
Abstract
This paper presents an ultra-low-voltage and power-efficient 10 bit hybrid successive approximation register (SAR) analog-to-digital converter (ADC). For reducing the digital-to-analog converter (DAC) capacitance and comparator requirement, we propose a hybrid architecture comprising a coarse 7 bit SAR ADC and fine 3.5 bit time-to-digital converter (TDC). The Vcm-based switching method is adopted for coarse conversion to reduce DAC power and maintain common mode. The residual voltage after coarse conversion is converted to time domain, and the fine TDC detects the least three bits with 0.5 bit redundancy by using a Vernier delay structure. Offset calibration and delay time locking are implemented to guarantee the ADC performance under process variation. The test chip, fabricated in 90 nm CMOS technology, occupied a core area of 0.04 mm 2 . With a 0.4 V supply and a Nyquist rate input, the prototype consumed 200 nW at 250 kS/s and achieved an ENOB of 8.63 bits and a SFDR of 78.5 dB. The operation frequency was scalable from 250 kS/s to 4 MS/s. The converter had a power supply range of 0.4-0.7 V, and the figure of merit (FoM) were 2.02-5.16 fJ/conversion step.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (NSC 102-2221-E-007-132, MOST 103-2220-E-007-024, MOST 104-2220-E-007-009)
This publication has 12 references indexed in Scilit:
- A 6-to-10-Bit 0.5 V-to-0.9 V Reconfigurable 2 MS/s Power Scalable SAR ADC in 0.18 $\mu{\rm m}$ CMOSIEEE Transactions on Circuits and Systems I: Regular Papers, 2014
- A 0.5-V 5.2-fJ/Conversion-Step Full Asynchronous SAR ADC With Leakage Power Reduction Down to 650 pW by Boosted Self-Power Gating in 40-nm CMOSIEEE Journal of Solid-State Circuits, 2013
- A 9-Bit 150-MS/s Subrange ADC Based on SAR Architecture in 90-nm CMOSIEEE Transactions on Circuits and Systems I: Regular Papers, 2013
- A 90-MS/s 11-MHz-Bandwidth 62-dB SNDR Noise-Shaping SAR ADCIEEE Journal of Solid-State Circuits, 2012
- A 10-b Ternary SAR ADC With Quantization Time Information UtilizationIEEE Journal of Solid-State Circuits, 2012
- A 0.5 V 1.1 MS/sec 6.3 fJ/Conversion-Step SAR-ADC With Tri-Level Comparator in 40 nm CMOSIEEE Journal of Solid-State Circuits, 2012
- A 21 fJ/Conversion-Step 100 kS/s 10-bit ADC With a Low-Noise Time-Domain Comparator for Low-Power Sensor InterfaceIEEE Journal of Solid-State Circuits, 2011
- A 10-bit 100-MS/s Reference-Free SAR ADC in 90 nm CMOSIEEE Journal of Solid-State Circuits, 2010
- A 10-bit Charge-Redistribution ADC Consuming 1.9 $\mu$W at 1 MS/sIEEE Journal of Solid-State Circuits, 2010
- A 10-bit 50-MS/s SAR ADC With a Monotonic Capacitor Switching ProcedureIEEE Journal of Solid-State Circuits, 2010