Fabrication and properties of C f /Ta 4 HfC 5 ‐SiC composite via precursor infiltration and pyrolysis

Authors:

Abstract
In this study, a C f /Ta 4 HfC 5 ‐SiC ultra‐high‐temperature ceramic matrix composite exhibiting a homogeneous phase distribution was successfully fabricated via precursor infiltration and pyrolysis processing. Initially, the pyrolysis and solid solution mechanisms exhibited by the Ta 4 HfC 5 precursor were investigated and characterized through TG‐MS and XRD analysis. The as‐fabricated C f /Ta 4 HfC 5 ‐SiC composite exhibited a density and open porosity of 2.84 g/cm 3 and 10.62 vol%, respectively. It also exhibited outstanding mechanical properties, with a flexural strength of 339 ± 20 MPa and fracture toughness of 11.56 ± 0.77 MPa·m 1/2 . The C f /Ta 4 HfC 5 ‐SiC composite demonstrated strong ablation resistance under a heat flux of 5 MW/m 2 at ~2400℃, with corresponding linear and mass recession rates of 5.33 μm/s and 6.18 mg/s, respectively. The combination of strong mechanical properties and ablation resistance provides a solid basis for the use of the C f /Ta 4 HfC 5 ‐SiC composite in a new generation of ultra‐high‐temperature materials.

This publication has 38 references indexed in Scilit: