A Fast Inspection of Tool Electrode and Drilling Depth in EDM Drilling by Detection Line Algorithm
Author:
Open Access
Abstract
The purpose of this study was to develop a novel measurement method using a machine vision system. Besides using image processing techniques, the proposed system employs a detection line algorithm that detects the tool electrode length and drilling depth of a workpiece accurately and effectively. Different boundaries of areas on the tool electrode are defined: a baseline between base and normal areas, a ND-line between normal and drilling areas (accumulating carbon area), and a DD-line between drilling area and dielectric fluid droplet on the electrode tip. Accordingly, image processing techniques are employed to extract a tool electrode image, and the centroid, eigenvector, and principle axis of the tool electrode are determined. The developed detection line algorithm (DLA) is then used to detect the baseline, ND-line, and DD-line along the direction of the principle axis. Finally, the tool electrode length and drilling depth of the workpiece are estimated via detected baseline, ND-line, and DD-line. Experimental results show good accuracy and efficiency in estimation of the tool electrode length and drilling depth under different conditions. Hence, this research may provide a reference for industrial application in EDM drilling measurement.Keywords
This publication has 9 references indexed in Scilit:
- New approach in tool wear measuring technique using CCD vision systemInternational Journal of Machine Tools and Manufacture, 2005
- Sensing and compensation of tool wear in milling EDMJournal of Materials Processing Technology, 2004
- An index to evaluate the wear resistance of the electrode in micro-EDMJournal of Materials Processing Technology, 2004
- Application of statistical filtering for optical detection of tool wearInternational Journal of Machine Tools and Manufacture, 2003
- A novel approach to quantifying tool wear and tool life measurements for optimal tool managementInternational Journal of Machine Tools and Manufacture, 2003
- Tool wear measuring technique on the machine using CCD and exclusive jigJournal of Materials Processing Technology, 2002
- Real-time Tool Wear Compensation in Milling EDMCIRP Annals, 2002
- Micro-EDM for Three-Dimensional Cavities - Development of Uniform Wear Method -CIRP Annals, 1998
- On the Derivation and Application of a Real-Time Tool Wear Sensor in EDMCIRP Annals, 1986