Microstructure and properties of Al 3 Zr/2024Al in situ composites after forging
- 29 July 2015
- journal article
- Published by Wiley in Rare Metals
- Vol. 35 (12) , 920-925
Abstract
To research the influencing rule of severe plastic deformation on Al matrix in situ composites, 10 wt% Al 3 Zr/2024Al in situ particle‐reinforced composite was prepared by direct melt reaction (DMR), and then, the composite was hot‐forged by one direction with 90 % plastic deformation. Then, the microstructure of the forging state composite was observed, and the change law of mechanical properties and friction performances after and before plastic deforming was compared. The results indicate that the Al 3 Zr‐reinforced particle rotates and breaks into smaller size of 10–20 µm with the matrix flow; in addition, these smaller particles distribute more orderly in orientation and dispersedly. The 2024 matrix grain changes from as‐cast tissue to fibrous tissue with length of 100 µm along the forging direction. Some mechanical properties of composites hot‐forged by one direction with 90 % plastic deformation are improved much obviously. For example, the tensile strength is improved by 39.75 %, reaching 225 MPa, and the hardness is improved by 35.84 %, reaching HBW 76.83. Besides, the wear rate reduces, wear depth and area decline, and the wear‐resisting property is improved after hot forging.Keywords
Funding Information
- National Natural Science Foundation of China (51174098)
- National Natural Science Foundation of China (51371091)
- National Natural Science Foundation of China (51001054)
This publication has 6 references indexed in Scilit:
- Effects of in situ generated ZrB2 nano-particles on microstructure and tensile properties of 2024Al matrix compositesJournal of Alloys and Compounds, 2014
- Microstructures of in-situ TiB2/7055Al Composites by the Ultrasonic and Magnetic Coupled FieldRare Metal Materials and Engineering, 2014
- Microstructure and tensile properties of isothermally forged Ni–43Ti–4Al–2Nb–2Hf alloyRare Metals, 2013
- Isothermal forging process design for spray‐formed FGH95 superalloy turbine disk based on numerical simulationRare Metals, 2013
- Processing, microstructure and tensile properties of nano-sized Al2O3 particle reinforced aluminum matrix compositesMaterials & Design (1980-2015), 2012
- Microstructure–mechanical properties relations in SiC–TiB2 compositeMaterials Chemistry and Physics, 2012