Analysis and Kinetics Modeling of the Isothermal Oxidation Behavior of Silicide Coatings
Open Access
Abstract
In this paper, an online apparatus was developed for isothermal thermogravimetric measurement of silicide coatings within a wide temperature range (from −180 °C to 2300 °C) based on thermogravimetric analysis. Firstly, the measuring principle and method regarding silicide coatings of this apparatus were studied. Secondly, on the basis of oxidation kinetics analysis, the intrinsic mechanism and kinetic parameters of three stages (oxidation, diffusion, and fall-off) of silicide coatings were studied, and the oxidation kinetics features were also analyzed. In addition, according to mathematical physics methods, a kinetics model of silicide coatings in different stages of oxidation was established, including parameters such as weight change, oxidation rate, oxidation time, etc. Finally, online isothermal experiments from −180 °C to 2300 °C werecarried out and analyzed. The results showed that the kinetic model established in this paper was in good agreement with the oxidation process of silicide coatings. In this paper, a complete kinetics model including different oxidation stages is proposed for the entire oxidation process of a silicide coating, revealing its oxidation mechanism. The research will play a significant role in the study of preparation technology improvement and high-temperature environment application. This paper studied two measuring methods: weight gain and weight loss measuring methods. Also, an experiment was carried out on the silicide coatings to explore the physical oxidation process between −180 °C and 2300 °C. The results proved the perfect consistency of the kinetics model proposed by this paper and the oxidation process of silicide coatings. This paper will play a significant role in the study of preparation technology enhancement and high-temperature environment application. It also provides a theoretical foundation for accelerated aging and life evaluation methods.Keywords
Funding Information
- National Natural Science Foundation of China (52206225, 61575029, JSZL2015603B002, 20172777007)
- National Defense Technical Basic Research Program of China (52206225, 61575029, JSZL2015603B002, 20172777007)
- Aviation Science Fund Project (52206225, 61575029, JSZL2015603B002, 20172777007)
This publication has 26 references indexed in Scilit:
- Preparation and characterization of molybdenum disilicide coating on molybdenum substrate by air plasma sprayingApplied Surface Science, 2013
- Effect of Time and Temperature on Thermal Barrier Coating Failure Mode Under Oxidizing EnvironmentJournal of Engineering for Gas Turbines and Power, 2008
- Microstructural effect on oxidation kinetics of NbSi2 at 1023KJournal of Alloys and Compounds, 2006
- Synthesis of oxidation resistant silicide coatings on Mo–Si–B alloysScripta Materialia, 2005
- Synthesis of molybdenum borides and molybdenum silicides in molten salts and their oxidation behavior in an air–water mixtureSurface and Coatings Technology, 2005
- High-temperature phase stability and tribological properties of laser clad Mo2Ni3Si/NiSi metal silicide coatingsActa Materialia, 2004
- Pack cementation coatings on Ti3Al–Nb alloys to modify the high-temperature oxidation propertiesSurface and Coatings Technology, 2000
- Coating Life Prediction Under Cyclic Oxidation ConditionsJournal of Engineering for Gas Turbines and Power, 1998
- Oxidation behaviour of matrix-modified carbon-carbon composites at high temperatureCarbon, 1995
- Kinetic model of the mechanism of high-temperature inhibited oxidation of polymersPolymer Degradation and Stability, 1988