Ash‐Forming Matter and Ash‐Related Problems
Authors:
- 15 July 2010
- book chapter
- Published by Wiley
- p. 493-531
Abstract
Deposit formation, that is, fouling and slagging, corrosion, and sintering are often cause for unwanted shutdowns of boilers. These problems are ash related. The composition and physical state of ash determines if problems may occur and where and when.Ash properties depend on the way ash‐forming matter is present in a fuel, how it is released from the fuel, and process conditions in the furnace.This chapter is dedicated to the more challenging fuels like biomass‐derived fuels that nowadays are used as a replacement for coal. Examples are taken from 92 fuels extracted from the Åbo Akademi fuel database, a collection of fuel analyses carried out at Åbo Akademi University during the last decade.Fuel characterization and analysis of ash‐forming matter in fuels will be discussed. Here, the analyses of the association of ash‐forming matter by chemical fractionation are emphasized. Release of ash‐forming matter and the formation of ash will be examined. Here, knowledge obtained from the fuel analyses plays an important role. Formed ash may cause deposits on heat exchanger surfaces, agglomeration of bed material in a fluidized bed, or corrosion. Nowadays, biomass fuels are often co‐fired, either with positive or negative effects on boiler availability. All these above‐mentioned phenomena can be seen from a chemistry point of view, where understanding of interaction of ash forming and melting behavior of ashes is seen to be vital.Keywords
This publication has 26 references indexed in Scilit:
- Application of chemical fractionation methods for characterisation of biofuels, waste derived fuels and CFB co-combustion fly ashesFuel, 2008
- Effective new chemicals to prevent corrosion due to chlorine in power plant superheatersFuel, 2008
- Determination of standard Gibbs free energy of formation for CaKPO4, CaK4(PO4)2, CaK2P2O7, and Ca10K(PO4)7 from solid-state e.m.f. measurements using yttria stabilised zirconia as solid electrolyteThe Journal of Chemical Thermodynamics, 2008
- Interaction of fuels in co-firing in FBCFuel, 2005
- Preventing chlorine deposition on heat transfer surfaces with aluminium–silicon rich biomass residue and additiveFuel, 2004
- The ash chemistry in fluidised bed gasification of biomass fuels. Part I: predicting the chemistry of melting ashes and ash–bed material interactionFuel, 2001
- The ash chemistry in fluidised bed gasification of biomass fuels. Part II: Ash behaviour prediction versus bench scale agglomeration testsFuel, 2001
- The prediction of behaviour of ashes from five different solid fuels in fluidised bed combustionFuel, 2000
- The implications of chlorine-associated corrosion on the operation of biomass-fired boilersProgress in Energy and Combustion Science, 2000
- The relation of mineral composition to slagging, fouling and erosion during and after combustionProgress in Energy and Combustion Science, 1984