Ultrasonic Butt Welding of Aluminum and Stainless Steel Specimens Using a 15 kHz Welding System
Authors:
- Jiromaru TsujinoJTJiromaru Tsujino
- Tetsugi UeokaTUTetsugi Ueoka
- Takashi KashinoTKTakashi Kashino
- Fumiharu SugaharaFSFumiharu Sugahara
- 1 July 1999
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 38 (7R) , 4254-4255
Abstract
The welding characteristics of aluminum and stainless steel plate specimens of 6 mm thickness joined by a 15 kHz ultrasonic butt welding system are studied. Both materials are anticorrosive and have various applications due to small deformation at the welded part. The specimens without special surface treatment were joined end to end with the weld strength of 100 MPa. The hardness of aluminum decreases at the area close to the welded surface, which is the same as in other materials. The hardness of stainless steel increases by approximately 20% near the welded surface. The increase in hardness due to ultrasonic vibration was observed for the first time though only the decrease in hardness was mentioned in previous studies.Keywords
This publication has 2 references indexed in Scilit:
- Measurement of the Temperature Rise at the Welding Surface of Different Metal Specimens Joined by a 15 kHz Ultrasonic Butt Welding SystemJapanese Journal of Applied Physics, 1998
- Ultrasonic Butt Welding of Large Metal Plates by Shifting Welding Tip Driving PositionJapanese Journal of Applied Physics, 1993