Influence of blade tip clearance shapes on aerodynamic performance of an axial flow compressor stator
Authors:
- 1 January 2002
- journal article
- conference paper
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 216 (5) , 395-401
Abstract
The influence of different tip clearance shapes on aerodynamic performance of an axial-flow compressor stator under the condition of both stationary and rotating hub was investigated by a numerical method. In this paper, the calculations are based on the three-dimensional Navier-Stokes equations expressed with non-orthogonal curvilinear coordinates and corresponding non-orthogonal velocity components, and the explicit time marching algorithm and Baldwin-Lomax turbulence model are adopted. The clearance shapes considered in this paper include large and small uniform tip clearance, expanding and shrinking tip clearance from the blade leading edge to the trailing edge along the axial direction. The analysis of computed results shows, at least for the test cases in this paper, that tip leakage vortex was found to be generated earlier for stationary hub cases than for rotating hub cases. On the same working conditions and within a certain range of clearance scale, the blade row with smaller tip clearance height can attain higher efficiency, and for the same circumferential leakage area, the blade row with expanding tip clearance was found to have higher efficiency.Keywords
This publication has 8 references indexed in Scilit:
- Experimental Investigation of Stepped Tip Gap Effects on the Performance of a Transonic Axial-Flow Compressor RotorJournal of Turbomachinery, 1998
- An Experimental Examination of Cantilevered and Shrouded Stators in a Multistage Axial Compressor1998
- Analysis of Tip Leakage Effects in a High Subsonic Annular Compressor Cascade1998
- The Influence of Shrouded Stator Cavity Flows on Multistage Compressor Performance1998
- The Effect of Tip Clearance Gap Size and Wall Rotation on the Performance of a High-Speed Annular Compressor Cascade1998
- Three-Dimensional Flow and Mixing in an Axial Flow Compressor With Different Rotor Tip Clearances1991
- Thin-layer approximation and algebraic model for separated turbulentflows1978
- Some shrouding and tip clearance effects in axial flow compressors1International Shipbuilding Progress, 1958