Solid-state fault isolation devices: application to future power electronics-based distribution systems
Authors:
- 5 July 2011
- journal article
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 5 (6) , 521-528
Abstract
This study addresses the timely issues of modelling, and defining selection criteria for, a solid-state fault isolation device (FID) intended for use in power electronics-based distribution systems (PEDS). This work subsequently derives the FID parameters by mapping the characteristics of a conventional medium-voltage distribution system onto that of the PEDS envisioned under a new multi-university Engineering Research Centre. When conventional circuit breakers are used in distribution systems, they have a relatively long clearing time, causing the voltage to collapse for a significant time. A semiconductor circuit breaker, however, is expected to be able to switch fast enough to keep a voltage disturbance within acceptable limits. The main focus of this study is to address the operational issues of the interaction between the power electronic converters and the solid-state FID. The utilisation of rate of current decrease (di/dt) control during turn-off in conjunction with passive clamping devices to manage the overvoltage that results from very fast circuit breaker operation is introduced. In contrast to a simple conventional RC-snubber circuit, the proposed overvoltage management avoids high leakage current, which is the undesirable drawback of RC-snubber circuits. The presented prototype is experimentally verified with low and medium-voltage test circuits.Keywords
This publication has 11 references indexed in Scilit:
- Development of a superconducting fault current limiter using various high-speed circuit breakersIET Electric Power Applications, 2009
- Implementation of a Ship-Wide Area Differential Protection SchemeIEEE Transactions on Industry Applications, 2008
- Circuit Breaker Technologies for Advanced Ship Power Systems2007
- Combined ZVS–ZCS topology for high-current direct current hybrid switches: design aspects and first measurementsIET Electric Power Applications, 2007
- A DC Hybrid Circuit Breaker With Ultra-Fast Contact Opening and Integrated Gate-Commutated Thyristors (IGCTs)IEEE Transactions on Power Delivery, 2006
- Solid-State Circuit Breakers and Current Limiters for Medium-Voltage Systems Having Distributed Power SystemsIEEE Transactions on Power Electronics, 2004
- Flexible dv/dt and di/dt control method for insulated gate power switchesIEEE Transactions on Industry Applications, 2003
- A novel hybrid current-limiting circuit breaker for medium voltage: principle and test resultsIEEE Transactions on Power Delivery, 2003
- Fast high-power/high-voltage switch using series-connected IGBTs with active gate-controlled voltage-balancing2002
- An active control gate drive circuit for IGBTs to realize low-noise and snubberless system2002