An Integrated Front-end Circuit Board for Air-Coupled CMUT Burst-Echo Imaging
Open Access
Abstract
To conduct burst-echo imaging with air-coupled capacitive micromachined ultrasonic transducers (CMUTs) using the same elements in transmission and reception, this work proposes a dedicated and integrated front-end circuit board design to build an imaging system. To the best of the authors’ knowledge, this is the first air-coupled CMUT burst-echo imaging using the same elements in transmission and reception. The reported front-end circuit board, controlled by field programmable gate array (FPGA), consisted of four parts: an on-board pulser, a bias-tee, a T/R switch and an amplifier. Working with our 217 kHz 16-element air-coupled CMUT array under 100 V DC bias, the front-end circuit board and imaging system could achieve 22.94 dB signal-to-noise ratio (SNR) in burst-echo imaging in air, which could represent the surface morphology and the three-dimensional form factor of the target. In addition, the burst-echo imaging range of our air-coupled CMUT imaging system, which could work between 52 and 273 mm, was discussed. This work suggests good potential for ultrasound imaging and gesture recognition applications.Keywords
Funding Information
- National Natural Science Foundation of China (61801324, 61771337)
- the Natural Science Foundation of Tianjin (18JCYBJC40400, 19YFZCSY00190)
This publication has 19 references indexed in Scilit:
- Fabrication and Characterization of a Wideband Low-Frequency CMUT Array for Air-Coupled ImagingIEEE Sensors Journal, 2020
- A Reference-Free and Non-Contact Method for Detecting and Imaging Damage in Adhesive-Bonded Structures Using Air-Coupled Ultrasonic TransducersMaterials, 2017
- Quantitative comparison of PZT and CMUT probes for photoacoustic imaging: Experimental validationPhotoacoustics, 2017
- Damage Detection in a Multi-Layered, Multi-Material Composite Using Air-Coupled Ultrasonic Resonance ImagingJournal of Nondestructive Evaluation, 2016
- Capacitive micromachined ultrasonic transducers based on annular cell geometry for air-coupled applicationsUltrasonics, 2016
- Applications of airborne ultrasound in human–computer interactionUltrasonics, 2014
- Design and Performance Analysis of Capacitive Micromachined Ultrasonic Transducer Linear ArrayMicromachines, 2014
- A capacitive micromachined ultrasonic transducer probe for assessment of cortical boneIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2014
- 3-D airborne ultrasound synthetic aperture imaging based on capacitive micromachined ultrasonic transducersUltrasonics, 2013
- A new detection method for capacitive micromachined ultrasonic transducersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2001