Ultrasound Sensors for Process Monitoring in Injection Moulding
Open Access
Abstract
Injection moulding is an extremely important industrial process, being one of the most commonly-used plastic formation techniques. However, the industry faces many current challenges associated with demands for greater product customisation, higher precision and, most urgently, a shift towards more sustainable materials and processing. Accurate real-time sensing of the material and part properties during processing is key to achieving rapid process optimisation and set-up, reducing down-times, and reducing waste material and energy in the production of defective products. While most commercial processes rely on point measurements of pressure and temperature, ultrasound transducers represent a non-invasive and non-destructive source of rich information on the mould, the cavity and the polymer melt, and its morphology, which affect critical quality parameters such as shrinkage and warpage. In this paper the relationship between polymer properties and the propagation of ultrasonic waves is described and the application of ultrasound measurements in injection moulding is evaluated. The principles and operation of both conventional and high temperature ultrasound transducers (HTUTs) are reviewed together with their impact on improving the efficiency of the injection moulding process. The benefits and challenges associated with the recent development of sol-gel methods for HTUT fabrication are described together with a synopsis of further research and development needed to ensure a greater industrial uptake of ultrasonic sensing in injection moulding.Keywords
Funding Information
- Science Foundation Ireland (16/RC/3872)
This publication has 76 references indexed in Scilit:
- Real‐time ultrasonic monitoring of the injection‐molding processJournal of Applied Polymer Science, 2007
- Principles of polymer processingChoice Reviews Online, 2007
- Comparison of the warpage optimization in the plastic injection molding using ANOVA, neural network model and genetic algorithmJournal of Materials Processing Technology, 2006
- Fast determination of phase inversion in polymer blends using ultrasonic techniquePolymer, 2005
- Orientation effects on the deformation and fracture properties of high‐density polyethylene/ethylene vinyl acetate (HDPE/EVA) blendsPolymer International, 2004
- Shear-induced change of exfoliation and orientation in polypropylene/montmorillonite nanocompositesJournal of Polymer Science Part B: Polymer Physics, 2002
- On‐line measurement of polymer orientation using ultrasonic technologyPolymer Engineering & Science, 2001
- High frequency ultrasonics using PZT sol gel compositesIntegrated Ferroelectrics, 1999
- Self-reinforcement of high-density polyethylene/low-density polyethylene prepared by oscillating packing injection molding under low pressureJournal of Applied Polymer Science, 1999
- The preparation of thin films by physical vapour deposition methodsThin Solid Films, 1990