Uncertainty Quantification for Junction Temperature of Automotive LED With Die-Attach Layer Microstructure
Authors:
- 23 January 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 18 (1) , 86-96
Abstract
Junction temperature is a critical metric for reliability evaluation of light-emitting diodes (LEDs) as light sources for automotive lamps. While numerous researchers have quantified the junction temperature accurately, uncertainty factors including electrical-thermal-mechanical boundary conditions and the die-attach layer (DAL) microstructure in automotive LEDs have not been addressed; the propagation of these variables degrades the precision of the junction temperature quantification. In this paper, a junction temperature uncertainty quantification framework involving finite element modeling, the evolution separation spectrum, and Monte Carlo simulation is introduced to build 3-D stochastic finite element models for automotive LEDs with stochastic DAL microstructures. Evolution of the statistical junction temperature probability for three types of automotive LEDs subjected to electrical-thermal-mechanical loadings is discussed and the failure risk is predicted. The results show that the temperature-mechanical displacement coupling of the DAL plays a major role in the junction temperature with regard to automotive boundary loadings, and the thermal power load is more likely to cause junction temperature deterioration of LED with DALs having voids. The automotive LED failure rate is dependent upon the boundary conditions, the DAL microstructures, and the LED numbers. The failure rate for LED modules with DALs having voids is higher than that for modules with uniform DALs; the failure rate is higher in aged LED modules; the failure risk at the given junction temperature threshold increases with increasing LED numbers in the module; and when operating at lower junction temperatures, the voids in LED DALs may not increase the module failure risk.Keywords
Funding Information
- National Natural Science Foundation of China (51107156)
- China Post-Doctoral Science Foundation (2014M 560702)
- China Scholarship Council (201508500043)
- Natural Science Foundation Project of CQNU (17XLB005)
This publication has 21 references indexed in Scilit:
- The effect of the temperature on the wear and resistance of automotive connectors subjected to vibration testsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2014
- White light emitting diodes with enhanced CCT uniformity and luminous flux using ZrO2 nanoparticlesNanoscale, 2014
- Uncertainty quantification and race car aerodynamicsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2014
- The Effects of Void Ratio in Die Attach Layer on Optical and Thermal Performances of High Power Light Emitting DiodeJournal of Nanoelectronics and Optoelectronics, 2014
- Thermal design and simulation of automotive headlamps using white LEDsMicroelectronics Journal, 2014
- Electrical–thermal–luminous–chromatic model of phosphor-converted white light-emitting diodesApplied Thermal Engineering, 2014
- Symptoms of visual discomfort from automobile lights and their correlation with headache in night-time taxi driversLighting Research & Technology, 2013
- Stochastic stability analysis of steel tubes with random initial imperfectionsFinite Elements in Analysis and Design, 2013
- Thermal uniformity of packaging multiple light-emitting diodes embedded in aluminum-core printed circuit boardsMicroelectronics Reliability, 2012
- Numerical study on thermal impacts of different void patterns on performance of chip-scale packaged power deviceMicroelectronics Reliability, 2012