Fundamentals of Force-Controlled Friction Riveting: Part II—Joint Global Mechanical Performance and Energy Efficiency
Open Access
Abstract
The present work investigates the correlation between energy efficiency and global mechanical performance of hybrid aluminum alloy AA2024 (polyetherimide joints), produced by force-controlled friction riveting. The combinations of parameters followed a central composite design of experiments. Joint formation was correlated with mechanical performance via a volumetric ratio (0.28–0.66 a.u.), with a proposed improvement yielding higher accuracy. Global mechanical performance and ultimate tensile force varied considerably across the range of parameters (1096–9668 N). An energy efficiency threshold was established at 90 J, until which, energy input displayed good linear correlations with volumetric ratio and mechanical performance (R-sq of 0.87 and 0.86, respectively). Additional energy did not significantly contribute toward increasing mechanical performance. Friction parameters (i.e., force and time) displayed the most significant contributions to mechanical performance (32.0% and 21.4%, respectively), given their effects on heat development. For the investigated ranges, forging parameters did not have a significant contribution. A correlation between friction parameters was established to maximize mechanical response while minimizing energy usage. The knowledge from Parts I and II of this investigation allows the production of friction riveted connections in an energy efficient manner and control optimization approach, introduced for the first time in friction riveting.Keywords
Funding Information
- Helmholtz Association (VH-NG-626)
- Österreichische Forschungsförderungsgesellschaft (852796)
- Bundesministerium für Verkehr, Innovation und Technologie (852796)
This publication has 17 references indexed in Scilit:
- Fundamentals of Force-Controlled Friction Riveting: Part I—Joint Formation and Heat DevelopmentMaterials, 2018
- Influence of process parameters on mechanical performance and bonding area of AA2024/carbon-fiber-reinforced poly(phenylene sulfide) friction spot single lap jointsMaterials & Design, 2015
- FricRiveting of aluminum 2024-T351 and polycarbonate: Temperature evolution, microstructure and mechanical performanceJournal of Materials Processing Technology, 2014
- Friction Riveting of glass–fibre-reinforced polyetherimide composite and titanium grade 2 hybrid jointsMaterials & Design (1980-2015), 2013
- Mechanical and failure behaviour of hybrid polymer–metal staked jointsMaterials & Design (1980-2015), 2013
- Henry Granjon Prize Competition 2009 Winner Category A: “Joining and Fabrication Technology” Friction Riveting: development and analysis of a new joining technique for polymer-metal multi-material structuresWelding in the World, 2011
- Impact toughness and fracture analysis of linear friction welded Ti–6Al–4V alloy jointsMaterials & Design (1980-2015), 2009
- Joining of polymers and polymer–metal hybrid structures: Recent developments and trendsPolymer Engineering & Science, 2009
- Temperature dependency of elastic moduli and internal dilational and shear frictions of polyetherimideJournal of Applied Polymer Science, 2003
- Polyetherimide: A new high‐performance thermoplastic resinJournal of Polymer Science: Polymer Symposia, 1983