Abstract
Next-generation wearable devices will enable clinical-grade, continuous ExG (ECG, EEG, EMG, etc.) biopotential monitoring, providing medical professionals with valuable longitudinal data outside of hospital settings. These devices must be ultra-low power $(\lt 10 \mu W)$ to enable long battery life while accurately digitizing sub-kHz, $\mu V-$level ExG signals in the presence of large motion and/or stimulation artifacts $(\gt 100$ mV) with high input-impedance $(Z_{in}\gt 10M\Omega)$ to avoid signal attenuation. Achieving such performance with conventional PGA + ADC architectures is challenging due to the conflicting low-power and $\gt 90$ dB dynamic-range (DR) requirements [1]. To address this, several direct digitization analog front-ends (AFEs) have been reported [2]–[4]. While these offer wide DR, they typically have low input-impedance $(\lt 5 M\Omega)$ and/or low power-efficiency (FoM $\le 172$ dB). This paper presents a scalable $2^{nd}-$ order voltage-controlled oscillator (VCO)-only $\Delta \sum$ ADC that achieves 92.3dB SNDR in a 1kHz bandwidth using a mismatch tolerant, multiphase gated-inverted ring-oscillator (GIRO) quantizer with dynamic power-scaling. The ADC uses an impedance-booster to maintain $\gt 50 M\Omega$ input-impedance over the entire bandwidth while consuming $4.25 \mu W$ during nominal operation and $5.8 \mu W$ in the presence of artifacts resulting in an FoM of 174.7dB.