Effect of Polar Anisotropy of Wood Loaded Perpendicular to Grain
Authors:
- 1 February 2001
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 13 (1) , 2-9
Abstract
This paper reports on an analysis and experimental verification of the effect of cylindrical anisotropy of softwood loaded in the radial r and tangential t growth plane, i.e., perpendicular to grain. This off-axis loading mode is especially design-relevant for curved and tapered glulam beams. The very low shear stiffness in the r,t on-axis growth plane, together with a complex shear coupling effect in polar coordinates, contributes essentially to extremely variable off-axis strain and stress fields. Thus far, no explicit empiric proof exists for these effects with considerable consequences on damage-relevant stresses. The exemplary off-axis investigations were performed with a cross-sectional slab of a spruce board loaded in tension parallel to the longer edges. True on-axis stiffnesses were determined for the simulations from two on-axis specimens cut from the test volume. Throughout a good agreement between the finite-element predictions and the measured results was obtained. The experiments, for exampl...Keywords
This publication has 4 references indexed in Scilit:
- Duration of load effect in tension perpendicular to the grain of glulam in different climatesEuropean Journal of Wood and Wood Products, 1998
- Lehrbuch des Ingenieurholzbaus1994
- Modelling elastic and shrinkage properties of wood based on cell structureWood Science and Technology, 1991
- CV. The elastic constants of spruceJournal of Computers in Education, 1923