Sequential phase energisation technique for capacitor switching transient reduction
Authors:
- 12 July 2007
- journal article
- Published by Institution of Engineering and Technology (IET) in IET Generation, Transmission & Distribution
- Vol. 1 (4) , 596-602
Abstract
The application of a sequential switching scheme for the mitigation of capacitor switching transients is presented. The method utilises neutral grounding impedance connected at the neutral point of the switched capacitor bank together with sequential pole switching. The neutral impedance is sized to minimise the open-circuit contact voltage of the capacitor breaker phases. Theoretical analysis of the proposed scheme has been carried out together with computer simulation. In addition, neutral impedance sizing criteria are presented in order to achieve minimal transient over-voltage caused by capacitor switching. The proposed method was found capable of reducing the transient over-voltage at the utility switched capacitor location to 1.07 and 1.12 p.u. at the customer load bus.Keywords
This publication has 7 references indexed in Scilit:
- A Sequential Phase Energization Technique for Transformer Inrush Current Reduction— Part I: Simulation and Experimental ResultsIEEE Transactions on Power Delivery, 2005
- A Sequential Phase Energization Technique for Transformer Inrush Current Reduction—Part II: Theoretical Analysis and Design GuideIEEE Transactions on Power Delivery, 2005
- Solving customer power quality problems due to voltage magnificationIEEE Transactions on Power Delivery, 1998
- Evaluating capacitor-switching devices for preventing nuisance tripping of adjustable-speed drives due to voltage magnificationIEEE Transactions on Power Delivery, 1996
- Point-on-wave capacitor switching and adjustable speed drivesIEEE Transactions on Power Delivery, 1996
- Impact of utility switched capacitors on customer systems-magnification at low voltage capacitorsIEEE Transactions on Power Delivery, 1992
- Transients in Low-Voltage Supply NetworksIEEE Transactions on Electromagnetic Compatibility, 1987