An Analysis of Four Different Approaches to Predict and Control Sintering
- 26 June 2009
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 92 (7) , 1419-1427
Abstract
Understanding and predicting sintering, which have been goals since the first attempts to mathematically describe the sintering process in the 1950s, are necessary to eliminate machining after sintering and to reliably predict and control the sintered microstructure and the resultant mechanical and other desired properties. In this study, four different sintering models are evaluated relative to one another and the experimental data, revealing their attributes, deficiencies, and modifications/improvements in order to facilitate their application, including the following: (i) a microstructure‐based model for solid state sintering, mainly developed by Riedel and Svoboda (RS); (ii) a viscous sintering (SOVS) model developed by Skorohod and advanced by Olevsky; (iii) a Kinetic Monte Carlo (KMC) model provided by Tikare; and (iv) the master sintering curve (MSC) approach introduced by Johnson et al. For different reasons, all four models have deficiencies that preclude achieving the most challenging goal of being able to comprehensively understand and predict sintering behavior: (i) the RS and the KMC models are complicated and difficult to use; (ii) the SOVS model cannot predict microstructure evolution; and (iii) the KMC model and the MSC have no stresses in their mathematical description, so they cannot simulate the effects of external forces. Each model also has attributes: (i) the KMC model allows one to follow the evolution of mesostructure; (ii) the MSC concept and the RS model are suitable for predicting densification curves for a wide variety of temperature–time profiles; and (iii) the SOVS and the RS models, which are implemented into finite element codes, can be used to predict density gradients and the warping of complex shape parts. Individually and together, the MSC, KMC, SOVS, and RS models can be useful tools to advance the fundamental understanding and improve the control of sintering.Keywords
This publication has 36 references indexed in Scilit:
- Verification, Performance, Validation, and Modifications to the SOVS Continuum Constitutive Model in a Nonlinear Large‐Deformation Finite Element CodeJournal of the American Ceramic Society, 2009
- Characterization of Heterogeneous Microstructure Evolution in ZrO 2 –3 mol%Y 2 O 3 during Isothermal SinteringJournal of the American Ceramic Society, 2007
- An Experimental Validation of a 3D Kinetic, Monte Carlo Model for Microstructural Evolution during SinteringAdvances in Science and Technology, 2006
- An Arrhenius‐Type Viscosity Function to Model Sintering Using the Skorohod–Olevsky Viscous Sintering Model Within a Finite‐Element CodeJournal of the American Ceramic Society, 2006
- Shrinkage and disappearance of a closed pore in the sintering of particle clusterActa Materialia, 2006
- An atomistic simulation of solid state sintering using Monte Carlo methodsMaterials Science and Engineering: A, 2002
- New solutions describing the formation of interparticle necks in solid-state sinteringActa Metallurgica et Materialia, 1995
- Densification and creep in the final stage of sinteringActa Metallurgica et Materialia, 1994
- Overview no. 117 The structure of constitutive laws for the sintering of fine grained materialsActa Metallurgica et Materialia, 1994
- A theoretical study of grain growth in porous solids during sinteringActa Metallurgica et Materialia, 1993