High-Density and High-Reliability Nonvolatile Field-Programmable Gate Array With Stacked 1D2R RRAM Array
- 27 January 2015
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 24 (1) , 139-150
Abstract
The huge area overhead of the interconnect is one of the critical issues in static random access memory (SRAM)-based field-programmable gate arrays (FPGAs), resulting in high power consumption and slow operation speed. Another critical issue is the volatile feature of the SRAM, which leads to high standby leakage current and long power-ON time. Resistive random access memory (RRAM) with a high resistance ratio and zero standby power possesses great potential in the FPGA applications. The conventional RRAM-based nonvolatile FPGAs (NVFPGAs) may use one-transistor 2-RRAM (1T2R) storage element to replace the SRAM or the one RRAM (1R) cell to replace both nMOS switch and SRAM. However, those NVFPGA schemes may suffer from the issues of low reliability, high configuration power, and high active leakage power. In this paper, we propose a novel element [one-diode two-RRAM (1D2R) cells] to replace the nMOS switch and 6 Transistors (6T) SRAM. Meanwhile, the novel block structures of the logic block, connection block, switch block, and the FPGA architecture based on the 1D2R element are proposed. Compared with the conventional 1T2R-based NVFPGA, our novel structure could improve the operation speed by 53% with a 40.5% lower operation power. Compared with the conventional 1R-based NVFPGA, the proposed scheme could greatly reduce the write error rate by eight orders with more than 20 times lower write power.Keywords
This publication has 39 references indexed in Scilit:
- Optimization Scheme to Minimize Reference Resistance Distribution of Spin-Transfer-Torque MRAMIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2013
- Dynamic-Load-Enabled Ultra-low Power Multiple-State RRAM DevicesScientific Reports, 2012
- Interfacial phase-change memoryNature Nanotechnology, 2011
- Coexistence of Filamentary and Homogeneous Resistive Switching in Fe‐Doped SrTiO3 Thin‐Film Memristive DevicesAdvanced Materials, 2010
- Nonpolar Nonvolatile Resistive Switching in Cu Doped $\hbox{ZrO}_{2}$IEEE Electron Device Letters, 2008
- FPGA Architecture: Survey and ChallengesFoundations and Trends® in Electronic Design Automation, 2008
- General models and a reduction design technique for FPGA switch box designsIEEE Transactions on Computers, 2003
- Generic universal switch blocksIEEE Transactions on Computers, 2000
- Universal switch modules for FPGA designACM Transactions on Design Automation of Electronic Systems, 1996
- Polarized (letter ‘8’) memory effects in hetero-systems and non hetero-systemsSolid State Communications, 1972