Intrinsically Stretchable Block Copolymer Based on PEDOT:PSS for Improved Performance in Bioelectronic Applications
- 24 January 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (4) , 4823-4835
Abstract
The conductive polyelectrolyte complex poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is ubiquitous in research dealing with organic electronic devices (e.g., solar cells, wearable and implantable sensors, and electrochemical transistors). In many bioelectronic applications, the applicability of commercially available formulations of PEDOT:PSS (e.g., Clevios) is limited by its poor mechanical properties. Additives can be used to increase the compliance but pose a risk of leaching, which can result in device failure and increased toxicity (in biological settings). Thus, to increase the mechanical compliance of PEDOT:PSS without additives, we synthesized a library of intrinsically stretchable block copolymers. In particular, controlled radical polymerization using a reversible addition–fragmentation transfer process was used to generate block copolymers consisting of a block of PSS (of fixed length) appended to varying blocks of poly(poly(ethylene glycol) methyl ether acrylate) (PPEGMEA). These block copolymers (PSS(1)-b-PPEGMEA(x), where x ranges from 1 to 6) were used as scaffolds for oxidative polymerization of PEDOT. By increasing the lengths of the PPEGMEA segments on the PEDOT:[PSS(1)-b-PPEGMEA(1–6)] block copolymers, (“Block-1” to “Block-6”), or by blending these copolymers with PEDOT:PSS, the mechanical and electronic properties of the polymer can be tuned. Our results indicate that the polymer with the longest block of PPEGMEA, Block-6, had the highest fracture strain (75%) and lowest elastic modulus (9.7 MPa), though at the expense of conductivity (0.01 S cm–1). However, blending Block-6 with PEDOT:PSS to compensate for the insulating nature of the PPEGMEA resulted in increased conductivity [2.14 S cm–1 for Blend-6 (2:1)]. Finally, we showed that Block-6 outperforms a commercial formulation of PEDOT:PSS as a dry electrode for surface electromyography due to its favorable mechanical properties and better adhesion to skin.Keywords
Funding Information
- University of California, San Diego
- Division of Graduate Education (DGE-1144086, DGE-2038238)
- Air Force Office of Scientific Research (FA9550-19-1-0278)
- H2020 Marie Sklodowska-Curie Actions
This publication has 66 references indexed in Scilit:
- Ultraviolet-ozone-treated PEDOT:PSS as anode buffer layer for organic solar cellsDiscover Nano, 2012
- Solution‐Processed Metallic Conducting Polymer Films as Transparent Electrode of Optoelectronic DevicesAdvanced Materials, 2012
- The Application of Organic Electrochemical Transistors in Cell‐Based BiosensorsAdvanced Materials, 2010
- Conductivity, work function, and environmental stability of PEDOT:PSS thin films treated with sorbitolOrganic Electronics, 2008
- A Semi‐transparent Plastic Solar Cell Fabricated by a Lamination ProcessAdvanced Materials, 2008
- Effect of structure on solution and interfacial properties of sodium polystyrene sulfonate (NaPSS)Polymer International, 2006
- Electrochemical Logic CircuitsAdvanced Materials, 2005
- On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatmentPolymer, 2004
- Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solventsSynthetic Metals, 2002
- Age-Related Mechanical Properties of Human Skin: An In Vivo Study.Journal of Investigative Dermatology, 1989