Influences of trailing edge split flap on the aerodynamic performance of vertical axis wind turbine
Authors:
Open Access
- 8 October 2020
- journal article
- research article
- Published by Wiley in Energy Science & Engineering
- Vol. 9 (1) , 101-115
Abstract
To improve the performance of a 3.5 kW small H‐type vertical axis wind turbine (VAWT) with the airfoil of NACA0015, a design method for installing split flaps at the trailing edge of a blade is proposed. By solving the two‐dimensional URANS equations, the simulation of VAWTs is carried out. The influences of the length (10% c‐30% c), arrangement positions (90% c‐70% c), and deflection angles (10°‐30°) of the split flaps on the performance of VAWT are determined by orthogonal design when Reynolds number is 2 × 105 and 1 < TSR < 3. In accordance with the influence degrees of these parameters and adopting the maximum wind energy utilization ratio CPmax and the maximum efficient operating range Δλmax as research objectives, the optimum flap length is determined as 22% c, the optimum deflection angle is 10°, and the optimum arrangement position is 92% c. Further studies show that the CPmax is increased by 5.8% and its Δλmax is increased by 25.9% after installing split flaps. Meanwhile, split flaps can change the Kutta‐Joukowsky trailing edge boundary condition, which increases the flow circulation around the airfoil. Also, split flaps can increase the positive pressure difference in the upwind area and reduce the negative pressure difference in the downwind area, which significantly improves the aerodynamic performance of VAWTs.Keywords
Funding Information
- National Natural Science Foundation of China (51707204)
- Fundamental Research Funds for the Central Universities (17CX05021)
This publication has 25 references indexed in Scilit:
- Effect of morphed trailing-edge flap on aerodynamic load control for a wind turbine blade sectionRenewable Energy, 2020
- Shape optimization and experimental validation of a drag vertical axis wind turbineEnergy, 2018
- Wind turbine power improvement utilizing passive flow control with microtabEnergy, 2018
- Delayed detached eddy simulation of the wind turbine airfoil S809 for angles of attack up to 90 degreesEnergy, 2017
- Inboard/outboard plasma actuation on a vertical-axis wind turbineRenewable Energy, 2015
- Modeling dynamic stall on wind turbine blades under rotationally augmented flow fieldsWind Energy, 2015
- Review of performance optimization techniques applied to wind turbinesApplied Energy, 2015
- Aerodynamic physics of smart load control for wind turbine due to extreme wind shearRenewable Energy, 2014
- Performance investigation of H-rotor Darrieus turbine with new airfoil shapesEnergy, 2012
- Three-Dimensional Separations in Axial CompressorsJournal of Turbomachinery, 2005