Induced grafted polymerization of a carboxyl-rich poly(acrylic acid) layer on PTFE using helix atmospheric pressure plasma
Authors:
- 1 March 2025
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (3) , 03SP74
Abstract
This study explores the plasma-induced graft polymerization of poly(acrylic acid) (PAA) on polytetrafluoroethylene (PTFE) using a helix atmospheric pressure plasma system. While PTFE exhibits excellent chemical resistance and thermal stability, its hydrophobic surface and poor adhesion limit broader applications. Plasma pretreatment was employed to activate the PTFE surface, enhancing the grafting rate of PAA during subsequent immersion in an acrylic acid solution. The effects of plasma power on grafting efficiency and surface properties were systematically analyzed. Optical emission spectroscopy and infrared thermal imaging characterized the plasma, while contact angle measurements and an electronic microbalance assessed changes in wettability and graft density. Scanning electron microscopy, ATR-FTIR, and X-ray photoelectron spectroscopy revealed modifications in surface morphology and chemical composition. The results demonstrated improved hydrophilicity and adhesion of PTFE surfaces, with tunable characteristics achieved by optimizing plasma power, broadening PTFE’s applicability in diverse industrial fields.Keywords
This publication has 39 references indexed in Scilit:
- Surface modification of polytetrafluoroethylene film by argon cold atmospheric pressure plasmas for enhancing bonding with graphene‐filled polyimide adhesivesPolymer Engineering & Science, 2021
- Evaluation of polymer hydrophobic recovery behavior following H2O plasma processingJournal of Applied Polymer Science, 2015
- Chemical and Morphological Characterization of Low‐k Dielectric Films Deposited From Hexamethyldisiloxane and Ethylene RF Glow DischargesPlasma Processes and Polymers, 2010
- The mesh disturbance effects in a low‐temperature cascade arc torch for surface modification of low density polyethyleneJournal of Applied Polymer Science, 2010
- Plasma‐Induced Direct‐Grafting on Polytetrafluoroethylene Films by Quasi‐Glow Discharge at Atmospheric PressurePlasma Processes and Polymers, 2009
- Stable Poly(Acrylic Acid) Films from Acrylic Acid/Argon Plasmas: Influence of the Mixture Composition and the Reactor Geometry on the Thin Films Chemical StructuresPlasma Chemistry and Plasma Processing, 2009
- Surface modification of a group of polymers using a low temperature cascade arc torchJournal of Applied Polymer Science, 2007
- The effect of interface modification between POM and PTFE on the properties of POM/PTFE compositesJournal of Applied Polymer Science, 2000
- Synthesis of poly(tetrafluoroethylene)/poly(butadiene) core-shell particles and their graft copolymerizationJournal of Applied Polymer Science, 1998
- Estimation of the surface free energy of polymersJournal of Applied Polymer Science, 1969