Preliminary Numerical Study on the Combustion Efficiency of a Multi-Slit Type Gas-Liquid Pintle Injector
Authors:
Open Access
- 30 November 2025
- journal article
- Published by The Korean Society of Propulsion Engineers in Journal of Propulsion and Energy
- Vol. 5 (2) , 17-26
Abstract
Following the successful landing of the Apollo lunar module on the moon surface in 1969 [1], pintle injectors are receiving renewed attention after their applications in SpaceX's Falcon 9 and the Chinese lunar lander Chang'E [2,3]. A pintle injector consists of a radial orifice on the side of the pintle and an annular axial orifice around the pintle, which inject oxidizer and fuel, respectively [4]. This unique structure is known to provide controllable propellant injection area, simplicity, and inherent combustion stability. Pintle injectors, originally developed to improve the mixing performance of hypergolic liquid-liquid propellants, are currently also applied to a variety of propellant combinations for gas-liquid injection, such as LOx/H 2 [5], LOx/CH 4 [6], and C 2 H 6 O/H 2 O 2 [7,8]. Most of the 20th century pintle injector research was conducted by TRW [9], and it was reported that the highest combustion efficiency was achieved at an interaction momentum ratio (IMR), which is expressed by Fig. 1 and Eq. (1), around 1 [10,11]. These findings have been repeatedly cited by previous studies as a solid guideline for pintle injector design [12,13] and experimentally reaffirmed by the liquid-liquid pintle injector hot firing tests of Sakaki et al. [14,15]. However, for gas-liquid pintle injectors, some recent works have reported that the peak combustion efficiency was observed at momentum ratios far from 1. Kim et al. experimentally investigated the combustion characteristics of aKeywords
This publication has 15 references indexed in Scilit:
- Spray structure of a multi-slit type throttleable gas–liquid pintle injectorPhysics of Fluids, 2025
- On development of green storable liquid rocket engine with thrust variationActa Astronautica, 2025
- Spray angle prediction model for a multi-slit type throttleable gas–liquid pintle injectorActa Astronautica, 2025
- Spray characteristics of a multi-slit type throttleable pintle injector with different slit heightsActa Astronautica, 2023
- Review of atomization and mixing characteristics of pintle injectorsActa Astronautica, 2022
- A detailed modelling on spray atomisation and combustion of LOX/GCH4 in variable area pintle injector rocket enginesCombustion Theory and Modelling, 2021
- Longitudinal combustion instability of a pintle injector for a liquid rocket engine combustorCombustion and Flame, 2018
- The development of 7500 N variable thrust engine for Chang’E-3SCIENTIA SINICA Technologica, 2014
- SpaceX2013
- TRW pintle engine heritage and performance characteristics2000