Cyclic Fatigue Crack Propagation Behavior of 9Ce‐TZP Ceramics with Different Grain Size
Authors:
- 1 October 1993
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 76 (10) , 2601-2606
Abstract
Cyclic fatigue crack growth behavior has been investigated in 9 mol% Ce‐TZP ceramics with grain sizes varying from 1.1 to 3.0 μm. To ascertain the interaction between crack resistance curve behavior and cyclic fatigue crack growth, cyclic fatigue tests were conducted with short double‐cantilever‐beam specimens in two conditions: (a) with a sharp precrack without preexisting t ‐ m transformation and (b) with a sharp crack after R ‐curve measurements, i.e., with preformed t ‐ m transformation in the crack region. Fatigue crack propagation occurs at applied stress intensity factor values as low as about 40% of the K I,∞ values measured in the R ‐curves. The size and shape of the t ‐ m transformation zones are found to be different for specimens obtained in monotonic loading R ‐curve measurements and in cyclic fatigue tests. For the specimens without preexisting t ‐ m transformation the overall crack growth behavior can be described by the Paris power law relation: d a /d N = AδK m I with m values of 15 for the 1.1‐μm grain size and between 8 and 9 for the material with larger grain sizes. For the specimens with the preformed transformation zone, a “V”shape d a /d N versus Δ K I relation is obtained. Explanations for these different results in the two conditions are discussed in terms of crack tip shielding effects.Keywords
This publication has 17 references indexed in Scilit:
- Crack Resistance and Fatigue of Transforming Ceramics: II, CeO 2 ‐Stabilized Tetragonal ZrO 2Journal of the American Ceramic Society, 1991
- Fatigue of Yttria‐Stabilized Zirconia: II, Crack Propagation, Fatigue Striations, and Short‐Crack BehaviorJournal of the American Ceramic Society, 1991
- Fatigue of Yttria‐Stabilized Zirconia: I, Fatigue Damage, Fracture Origins, and Lifetime PredictionJournal of the American Ceramic Society, 1991
- Crack Resistance and Fatigue of Transforming Ceramics: I, Materials in the ZrO 2 –Y 2 O 3 –Al 2 O 3 SystemJournal of the American Ceramic Society, 1991
- Fatigue Crack Propagation in Ceria‐Partially‐Stabilized Zirconia (Ce‐TZP)‐Alumina CompositesJournal of the American Ceramic Society, 1990
- Cyclic Fatigue‐Crack Propagation in Magnesia‐Partially‐Stabilized Zirconia CeramicsJournal of the American Ceramic Society, 1990
- Cyclic Fatigue Behavior of an Alumina Ceramic with Crack‐Resistance CharacteristicsJournal of the American Ceramic Society, 1989
- Fatigue Crack Propagation in Transformation‐Toughened Zirconia CeramicJournal of the American Ceramic Society, 1987
- Reversible Transformation Plasticity in Uniaxial Tensioncompression Cycling of Mg-PSZMRS Proceedings, 1986
- Stress intensity factors for bend and compact specimensEngineering Fracture Mechanics, 1972