Tip-based nano-manufacturing and -metrology
Open Access
- 1 May 2019
- journal article
- review article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 37 (3) , 030803
Abstract
Sub-5 nm lithography and metrology are the key technologies for more CMOS and beyond CMOS nanoelectronics. To keep up with scaling down of nanoelectronic components, novel instrumentation for nanometer precise placement, overlay alignment, and measurement are essential to enable fabrication of next generation nanoelectronic systems. In particular, scanning probe microscopy (SPM) based methods for surface modification and measurement are the emerging techniques for producing and testing of sub-5 nm features. In this article, the authors demonstrate nanoscale lithography and coordinate metrology technologies, both being based on SPM methodology. Scanning probes with a piezoresistive deflection read-out and an integrated deflection actuator, later on referred to as the active piezoresistive cantilevers, were used for lithography employing field emission patterning. They were also integrated with the so-called nanomeasuring machine (NPM) and used for surface imaging, which made it possible to measure the structure dimensions in the 25 × 25 × 5 mm3 space with 0.1 nm resolution and great accuracy. The basic NPM concept relies on a unique arrangement, enabling the so-called Abbe error-free measurements in all axes over the total scan range. The combination of the active piezoresistive cantilevers and NPM technologies makes it possible to store the exact location on the investigated surface, which can be found again with an accuracy of less than 2.5 nm. This system is also predestinated for the critical dimension, quality, and overlay control.Keywords
Funding Information
- National Science Center (2015/17/B/ST7/03876)
- Deutsche Forschungsgemeinschaft (GRK 2182)
- FP7 Ideas: European Research Council (318804)
This publication has 21 references indexed in Scilit:
- High speed quasi-monolithic silicon/piezostack SPM scanning stageMicroelectronic Engineering, 2012
- Micromachined self-actuated piezoresistive cantilever for high speed SPMMicroelectronic Engineering, 2012
- Scanning probe nanolithography on calixareneMicroelectronic Engineering, 2012
- The spring constant calibration of the piezoresistive cantilever based biosensorSensors and Actuators B: Chemical, 2012
- Recent developments and challenges of nanopositioning and nanomeasuring technologyMeasurement Science and Technology, 2012
- Performance and limitation of nanomeasuring technologyInternational Journal of Nanomanufacturing, 2011
- High‐speed atomic force microscopy for observing dynamic biomolecular processesJournal of Molecular Recognition, 2007
- New applications of the nanopositioning and nanomeasuring machine by using advanced tactile and non-tactile probesMeasurement Science and Technology, 2007
- Piezoresistive sensors for scanning probe microscopyUltramicroscopy, 2000
- Observation of a chemical reaction using a micromechanical sensorChemical Physics Letters, 1994