Toughening of polybenzoxazine by alloying with urethane prepolymer and flexible epoxy: A comparative study
- 27 January 2005
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 45 (3) , 288-296
Abstract
The toughness of polybenzoxazine can effectively be improved by alloying with isophorone diisocyanate (IPDI)‐based urethane prepolymers (PU) or with flexible epoxy (EPO732). The experimental results, i.e., flexural testing and dynamic mechanical analysis, reveal that the toughness of the alloys of the rigid polybenzoxazine and the PU or the EPO732 systematically increases with the amount of either toughener, due to the addition of more flexible molecular segments in the polymer hybrids. The curing temperature of the benzoxazine resin (bisphenol A‐aniline type [BA‐a]) at about 225°C shifts to a higher value when the fraction of BA‐a in either alloy decreases. Interestingly, the enhancement in the glass transition temperature (Tg) of BA‐a/PU alloys is clearly observed, i.e., Tg of the BA‐a/PU alloys are significantly higher (Tg beyond 200°C) than those of the parent resins, i.e., 165°C for BA‐a and −70°C for PU. However, this characteristic is not observed in the BA‐a/EPO732 alloy systems. The enhanced Tg of the BA‐a/PU alloy at a 70/30 mass ratio is found to be 220°C, while that of BA‐a/EPO732 at the same mass ratio is observed to be only 95°C, which further decreases as the content of epoxy fraction increases. Furthermore, the degradation temperature based on 5% weight loss in the thermogravimetric analyzer (TGA) thermograms of the BA‐a/PU alloys is found to improve with the presence of the PU, though the opposite trend is observed in the BA‐a/EPO732 systems. The char yield of both alloy systems is steadily enhanced with the increased benzoxazine content because the char yield of the polybenzoxazine is inherently higher than that of the two tougheners. Therefore, the polybenzoxazine alloys with the IPDI‐based urethane prepolymer, e.g., the 70/30 BA‐a/PU, are a promising system for a tough, high thermal stability polymeric network, suitable for both bulk and composite matrix applications. POLYM. ENG. SCI. 45:288–296, 2005. © 2005 Society of Plastics Engineers.Keywords
This publication has 10 references indexed in Scilit:
- Synergism observed in polybenzoxazine and poly(ε-caprolactone) blends by dynamic mechanical and thermogravimetric analysisPolymer, 2001
- Preparation and Properties of Poly(urethane-benzoxazine)s Based on Monofunctional Benzoxazine MonomerPolymer Journal, 2001
- Synthesis and characterization of poly(urethane-benzoxazine) films as novel type of polyurethane/phenolic resin compositesJournal of Polymer Science Part A: Polymer Chemistry, 2000
- Development of new class of electronic packaging materials based on ternary systems of benzoxazine, epoxy, and phenolic resinsPolymer, 2000
- Synergism and multiple mechanical relaxations observed in ternary systems based on benzoxazine, epoxy, and phenolic resinsJournal of Polymer Science Part B: Polymer Physics, 2000
- New thermosetting resin from poly(p-vinylphenol) based benzoxazine and epoxy resinJournal of Applied Polymer Science, 2000
- New thermosetting resin from terpenediphenol-based benzoxazine and epoxy resinJournal of Applied Polymer Science, 1999
- Reaction of benzoxazine-based phenolic resins with strong and weak carboxylic acids and phenols as catalystsJournal of Polymer Science Part A: Polymer Chemistry, 1999
- Synthesis and properties of maleimide-terminated polyurethane AB crosslinked polymers I. Polyurethane/allyl nonyl novolac resin ABCPsEuropean Polymer Journal, 1999
- Mechanical characterization of copolymers based on benzoxazine and epoxyPolymer, 1996