Hydroxyapatite-coated metals: Interfacial reactions during sintering
- 1 January 2005
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science: Materials in Medicine
- Vol. 16 (2) , 101-106
Abstract
Electrophoretic deposition (EPD) is a low cost flexible process for producing HA coatings on metal implants. Its main limitation is that it requires heating the coated implant in order to densify the HA. HA typically sinters at a temperature below 1150∘C, but metal implants are degraded above 1000∘C. Further, the metal induces the decomposition of the HA coating upon sintering. Recent developments have enabled EPD of metathesis-synthesised uncalcined HA which sinters at ∼ 1000∘C. The effects of temperature on HA-coated Ti, Ti6Al4V, and 316L stainless steel were investigated for dual coatings of metathesis HA sintered at 1000∘C. The use of dual HA coatings (coat, sinter, coat, sinter) enabled decomposition to be confined to the “undercoat” (HA layer 1), with the surface coating decomposition free. The tensile strength of the three metals was not significantly affected by the high sintering temperatures (925∘C < T < 1000∘C). XRD/SEM/EDS analyses of the interfacial zones revealed that 316L had a negligible HA:metal interfacial zone (∼1 μm) while HA:Ti and HA:Ti6Al4V had large interfacial zones (>10 μm) comprising a TiO2 oxidation zone and a CaTiO3 reaction zone.Keywords
This publication has 19 references indexed in Scilit:
- Morphological stability of hydroxyapatite precursorMaterials Letters, 2003
- Electrophoretic Deposition of Hydroxyapatite Coatings on Metal Substrates: A Nanoparticulate Dual-Coating ApproachJournal of Sol-Gel Science and Technology, 2001
- Interfacial bond strength of electrophoretically deposited hydroxyapatite coatings on metalsJournal of Materials Science: Materials in Medicine, 1999
- Structural changes of thermally sprayed hydroxyapatite investigated by Rietveld analysisBiomaterials, 1996
- Development of a titanium alloy suitable for an optimized coating with hydroxyapatiteBiomaterials, 1995
- Compositional variations in the surface and interface of calcium phosphate ceramic coatings on Ti and Ti-6Al-4V due to sintering and immersionBiomaterials, 1991
- Calcium phosphate ceramic coatings on porous titanium: effect of structure and composition on electrophoretic deposition, vacuum sintering and in vitro dissolutionBiomaterials, 1990
- Fabrication of YBa2Cu3O7−y superconducting coatings by electrophoretic depositionApplied Physics Letters, 1989
- Synthesis and Characterization of Hydroxyapatite Powder from Calcium AcetateJournal of the Ceramic Association, Japan, 1987
- Structural analysis of hydroxyapatite coatings on titaniumBiomaterials, 1986