Enhancing Interfacial Stability Between NASICON‐Type Solid‐State Electrolyte and Lithium Metal Anode via Multifunctional Synergistic Interface Engineering
Abstract
Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP)‐based all‐solid‐state lithium metal batteries (ASSLMBs) hold exceptional promise for achieving high energy density and excellent safety, yet their practical application is severely hindered by critical interfacial issues, including poor contact, side reactions, and dendrite growth. Herein, a flexible multifunctional composite interlayer (PVGa) composed of Poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP), Lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and gallium(III) fluoride (GaF 3 ) is constructed at the LATP/Li interface via a facile solution drop‐casting method. The polymer matrix effectively fills interfacial voids, homogenizes current distribution, and suppresses side reactions, while GaF 3 undergoes in situ alloying with the Li anode to form a uniform and dense LiF/Li x Ga hybrid SEI layer with high ionic conductivity and interfacial energy, guiding homogeneous Li deposition. Benefiting from this synergistic effect, the LATP@PVGa symmetric cell achieves a critical current density of 1.9 mA cm −2 and exhibits stable cycling over 6000 h at 0.1 mA cm −2 and 4500 h at 0.2 mA cm −2 . Moreover, LiFePO 4 full cells retain 86.7% capacity after 1100 cycles at 0.5 C, demonstrating excellent practical application potential. This work provides a novel and effective strategy to address the multifaceted interfacial challenges in LATP‐based ASSLMBs.Keywords
Funding Information
- National Natural Science Foundation of China (52272184)
This publication has 42 references indexed in Scilit:
- Decoding NASICON and Its Metal Interface for Solid‐State BatteriesAdvanced Materials, 2026
- Accelerated 3D Percolation Network for Ultra‐High Critical Current Density of Composite Solid‐State ElectrolyteAdvanced Functional Materials, 2025
- Optimizing the Electron Density of PVDF‐HFP‐Based Solid Polymer Electrolyte by Donor–Acceptor COF Toward High‐Performance Solid‐State Lithium Metal BatteriesAdvanced Materials, 2025
- Interfacial Sodiopobicity Regulating for Dendrite‐Free Solid‐State Sodium Metal BatteriesAdvanced Functional Materials, 2025
- Constructing PVDF‐Based Polymer Electrolyte for Lithium Metal Batteries by Polymer‐Induced Phase Structure Adjustment StrategyAdvanced Functional Materials, 2025
- In Situ Construction of LiF/Li3N/LixGa Hybrid SEI to Boost Long‐Lifespan Succinonitrile‐Based Solid‐State Lithium Metal BatteriesAdvanced Functional Materials, 2025
- A Hybrid LiCl/LixSn Conductive Interlayer to Unlock the Potential of Solid‐State Lithium Metal BatteriesAdvanced Functional Materials, 2024
- Alloyable Viscous Fluid for Interface Welding of Garnet Electrolyte to Enable Highly Reversible Fluoride Conversion Solid State BatteriesAdvanced Functional Materials, 2022
- Boron Nitride‐Based Release Agent Coating Stabilizes Li1.3Al0.3Ti1.7(PO4)3/Li Interface with Superior Lean‐Lithium Electrochemical Performance and Thermal StabilityAdvanced Functional Materials, 2022
- Self‐Suppression of Lithium Dendrite in All‐Solid‐State Lithium Metal Batteries with Poly(vinylidene difluoride)‐Based Solid ElectrolytesAdvanced Materials, 2019