Effects of Adhesive Thickness, Open Time, and Surface Cleanness on the Peel Strength of Adhesive-Bonded Seams of EPDM Rubber Roofing Membrane
Authors:
- 1 January 1990
- book chapter
- Published by ASTM International
- p. 21-36
Abstract
A laboratory study was conducted to examine the effects of adhesive thickness, open time, and surface cleanness on T-peel strength of EPDM (ethylene propylene diene terpolymer) rubber seam specimens. Seam specimens bonded with butyl-based contact adhesive were tested after a 2-week cure time. The peel strength generally showed a positive dependency on the adhesive thickness except that it tended towards a plateau value for thick adhesive layers. The leveling of peel strength at large thickness might result from the presence of small voids in the adhesive layer. The peel strength was not dependent on the open times used in this study. Increased levels of surface contamination lowered the peel strength and changed the failure mode from cohesive to adhesive.Keywords
This publication has 7 references indexed in Scilit:
- Further investigation of the effect of application parameters on adhesive-bonded seams of single-ply roof membranesMaterials and Structures, 1988
- Adhesives Technology HandbookJournal of Engineering Materials and Technology, 1987
- Tests of Adhesive-Bonded Seams of Single-Ply Rubber Membranes1987
- Bonding Ethylene Propylene Diene Monomer Roofing Membranes: The Theory and Practice of Adhering Vulcanized Ethylene Propylene Diene to Itself1982
- Single-Ply Synthetic Rubber Roofing Membranes1982
- Peel mechanics of adhesive jointsPolymer Engineering & Science, 1977
- Air Entrapment in the Use of Structural Adhesive FilmsThe Journal of Adhesion, 1972