Calculation of in situ acoustic sediment attenuation using off‐the‐shelf horizontal ADCPs in low concentration settings
- 22 June 2017
- journal article
- research article
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 53 (6) , 5017-5037
Abstract
The use of “off‐the‐shelf” acoustic Doppler velocity profilers (ADCPs) to estimate suspended sediment concentration and grain‐size in rivers requires robust methods to estimate sound attenuation by suspended sediment. Theoretical estimates of sediment attenuation require a priori knowledge of the concentration and grain‐size distribution (GSD), making the method impractical to apply in routine monitoring programs. In situ methods use acoustic backscatter profile slope to estimate sediment attenuation, and are a more attractive option. However, the performance of in situ sediment attenuation methods has not been extensively compared to theoretical methods. We used three collocated horizontally mounted ADCPs in the Fraser River at Mission, British Columbia and 298 observations of concentration and GSD along the acoustic beams to calculate theoretical and in situ sediment attenuation. Conversion of acoustic intensity from counts to decibels is influenced by the instrument noise floor, which affects the backscatter profile shape and therefore in situ attenuation. We develop a method that converts counts to decibels to maximize profile length, which is useful in rivers where cross‐channel acoustic profile penetration is a fraction of total channel width. Nevertheless, the agreement between theoretical and in situ attenuation is poor at low concentrations because cross‐stream gradients in concentration, sediment size or GSD can develop, which affect the backscatter profiles. We establish threshold concentrations below which in situ attenuation is unreliable in Fraser River. Our results call for careful examination of cross‐stream changes in suspended sediment characteristics and acoustic profiles across a range of flows before in situ attenuation methods are applied in river monitoring programs.Keywords
Funding Information
- PADI Foundation
This publication has 39 references indexed in Scilit:
- Scattering from suspended sediments having different and mixed mineralogical compositions: Comparison of laboratory measurements and theoretical predictionsThe Journal of the Acoustical Society of America, 2013
- On the possibility of single-frequency acoustic measurement of sand and clay concentrations in uniform suspensionsContinental Shelf Research, 2012
- Extracting Meaningful Information from Uncalibrated Backscattered Echo Intensity DataJournal of Atmospheric and Oceanic Technology, 2010
- Measurements and inversion of acoustic scattering from suspensions having broad size distributionsThe Journal of the Acoustical Society of America, 2009
- Sediment transport along lower Fraser River: 1. Measurements and hydraulic computationsWater Resources Research, 1999
- A simplified method for determining sediment size and concentration from multiple frequency acoustic backscatter measurementsThe Journal of the Acoustical Society of America, 1998
- Determining suspended sand size and concentration from multifrequency acoustic backscatterThe Journal of the Acoustical Society of America, 1993
- The interpretation and evaluation of a 3-MHz acoustic backscatter device for measuring benthic boundary layer sediment dynamicsThe Journal of the Acoustical Society of America, 1989
- Sound absorption based on ocean measurements: Part I: Pure water and magnesium sulfate contributionsThe Journal of the Acoustical Society of America, 1982
- The Absorption of Sound in Suspensions of Irregular ParticlesThe Journal of the Acoustical Society of America, 1948