Low-Cost Optical Filters Based on SiOxCy:H and Ag Thin Films Fabricated by Plasma Enhanced Chemical Vapor Deposition and Sputtering
Open Access
- 20 November 2024
- Vol. 11 (11) , 1096
Abstract
Hexamethyldisiloxane (HMDSO) is an organosilicon compound with a modifiable bandgap, depending on the deposition conditions. This material has many unique properties due to its stability, low toxicity, and strong adhesion, making it useful as a protective barrier against corrosion, moisture, and oxidation. In this work, HMDSO films were deposited on glass substrates by the Plasma Enhanced Chemical Vapor Deposition (PECVD) technique at different deposition times. The optical properties of HMDSO films, such as dielectric permittivity, refractive index, extinction and absorption coefficients, and band gap energy, are inferred from transmission and reflection spectra. As the deposition time increased, the real part of the dielectric constant, the refractive index, and the bandgap energy showed a decrease, dropping from 4.24 to 3.40, from 2.06 to 1.84, and from 2.85 eV to 2.03 eV, respectively. The latter result is determined using classical models such as the O’Leary-Johnson-Lim (‘OJL’) interband transition and the harmonic oscillator model. HMDSO and Silver are used in this study for the fabrication of optical filters using two types of structures, a multiple cavity metal–dielectric (MCMD) and the Fabry–Perot structure. The silver layers are deposited by a sputtering process. The MCMD optical filter shows a higher transmittance of about 30%, but a wide range of wavelengths is transmitted. In contrast, the Fabry–Perot filter showed high contrast but a lower transmittance of about 20%.Keywords
Funding Information
- Agence Nationale de la Recherche (22003)
This publication has 31 references indexed in Scilit:
- Optical modeling and investigation of thin films based on plasma-polymerized HMDSO under oxygen flow deposited by PECVDJournal of Materials Science: Materials in Electronics, 2023
- Wettability control of PET surface by plasma-induced polymer film deposition and plasma/UV oxidation in ambient airColloids and Surfaces A: Physicochemical and Engineering Aspects, 2018
- Photonic band gap and defects modes in inorganic/organic photonic crystal based on Si and HMDSO layers deposited by sputtering and PECVDOptical Materials, 2018
- Optical simulation, corrosion behavior and long term thermal stability of TiC-based spectrally selective solar absorbersSolar Energy Materials and Solar Cells, 2017
- The Organosilicon thin Film Deposited Using an Atmospheric Pressure Dual‐Frequency 50 kHz/33 MHz Frequency MicroPlasma JetContributions to Plasma Physics, 2016
- P‐145: Optimization of Molybdenum Oxides for Low‐Reflectance Thin Films using Numerical SimulationSID Symposium Digest of Technical Papers, 2015
- Influence of Argon and Nitrogen Admixture in HMDSO/O2 Plasmas onto Powder FormationPlasma Processes and Polymers, 2010
- Remote AP‐PECVD of Silicon Dioxide Films from Hexamethyldisiloxane (HMDSO)Chemical Vapor Deposition, 2005
- Optical properties of plasma polymer films (hexamethyldisiloxane)Thin Solid Films, 1993
- Refractive indexes of amorphous boron films prepared by plasma depositionJournal of Physics and Chemistry of Solids, 1992