Elastoplastic load–depth hysteresis in pyramidal indentation
Authors:
- 1 August 2002
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 17 (8) , 2161-2173
Abstract
Extensive indentation tests were conducted for nineteen different engineering materials ranging from brittle to ductile materials, and including hard ceramics, ductile metals, and a soft organic polymer. Three tetrahedral pyramid indenters with specific face angles β [shallow pyramid (β = 10°), Vickers (β = 22°), and sharp pyramid (β = 40°) indenters] were used. All the materials tested were subjected to the quadratic load P and penetration depth h relationship P = k1h2 on loading, and most of the tested materials to the quadratic unloading relationship of P = k2(h − hr)2 with the residual depth hr after a complete unload. To determine the contact area at peak indentation load, a specially designed depth-sensing instrument was constructed, on which the contact behavior during loading/unloading was examined by through thickness observation of transparent specimens. All the characteristic indentation parameters were investigated on the basis of simple elastoplastic model, and correlated well with the nondimensional strain E′ tan β/H, in which the elastic modulus E′ was a measure for elasticity, true hardness H was a measure for plasticity, and the inclined face angle β characterized the indenter. The ratio of the conventional Meyer hardness HM to the true hardness H of the materials tested ranged from 0.2 to 0.9 as a function of E′ tan β/H. The cavity model suggested that true hardness H is expressed by the yield stress Y through a constraint factor C as H = C · Y with C ≈ 5.Keywords
This publication has 21 references indexed in Scilit:
- Numerical study on the measurement of thin film mechanical properties by means of nanoindentationJournal of Materials Research, 2001
- Pyramidal indentation load–depth curve of viscoelastic materialsJournal of Materials Research, 1999
- A critical examination of the fundamental relations used in the analysis of nanoindentation dataJournal of Materials Research, 1999
- Determination of elastoplastic properties by instrumented sharp indentationScripta Materialia, 1999
- Energy principle of the indentation-induced inelastic surface deformation and hardness of brittle materialsActa Metallurgica et Materialia, 1993
- A simple predictive model for spherical indentationJournal of Materials Research, 1993
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentationJournal of Materials Research, 1992
- Contact MechanicsJournal of Tribology, 1986
- A method for interpreting the data from depth-sensing indentation instrumentsJournal of Materials Research, 1986