Blends of high density polyethylene and poly( l ‐lactic acid): Mechanical and thermal properties
- 2 October 2013
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 54 (9) , 2155-2160
Abstract
The blends of high‐density polyethylene (HDPE) and poly( l ‐lactic acid) (PLLA) were prepared by melt blending method in an extrusion mixer with a postextrusion blown film attachment. The ratios of HDPE/PLLA blends were taken as 100/0, 95/5, 90/10, 85/15, and 80/20. The 80/20 blend was further compatibilized by adding maleic anhydride‐grafted polyethylene in different ratios (up to 8 wt%). Based on the mechanical properties of the films, the compositions HDPE80 (80% HDPE and 20% PLLA) and HD80C4 (80% HDPE, 20% PLLA, and 4% compatibilizer) were found to be optimum and considered for further analysis. The thermal properties of these selected blends were investigated by means of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). TGA study revealed that the addition of the PLLA somewhat decreased the thermal stability of HDPE. DSC investigation showed that the blends were partially miscible only. X‐ray diffraction (XRD) analysis enlightened that the crystallinity of blends was slightly increased with addition of PLLA. Immiscibility of the two polymers was diminished in the presence of compatibilizer, as indicated by the scanning electron microscopy (SEM) of the blends. These partially biodegradable blends may be used for flexible packaging applications. POLYM. ENG. SCI., 54:2155–2160, 2014. © 2013 Society of Plastics EngineersKeywords
Funding Information
- Council of Scientific and Industrial Research (02(0035)/11/EMR-II)
This publication has 33 references indexed in Scilit:
- Thermoplastic starch blends: A review of recent worksPolymer Science, Series A, 2012
- Thermal degradation and physical aging of linear low density polyethylene and poly(l-lactic acid) blendsJournal of Polymer Engineering, 2012
- Thermal, rheological, mechanical and morphological behavior of HDPE/chitosan blendCarbohydrate Polymers, 2011
- Biodegradability assessment of aliphatic polyesters‐based blends using standard methodsJournal of Applied Polymer Science, 2010
- Polyamide-6/Poly(lactic acid) Blends Compatibilized by the Maleic Anhydride Grafted Polyethylene-Octene ElastomerPolymer-Plastics Technology and Engineering, 2010
- Synthesis of Poly(Lactic Acid): A ReviewJournal of Macromolecular Science, Part C: Polymer Reviews, 2005
- Preparation and Properties of Plasticized Poly(lactic acid) FilmsBiomacromolecules, 2005
- The influence of block copolymer microstructure on the toughness of compatibilized polylactide/polyethylene blendsPolymer, 2004
- Programmed-Life Plastics from Polyolefins: A New Look at SustainabilityBiomacromolecules, 2001
- Recycling of the “light fraction” from municipal post-consumer plastics: effect of adding wood fibersPolymers for Advanced Technologies, 1999