Facility for calibration of optical and condensation particle counters based on a turbulent aerosol mixing tube and a reference optical particle counter
Authors:
Open Access
- 1 July 2019
- journal article
- research article
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 90 (7) , 075111
Abstract
In this study, we present a custom-made facility developed for evaluating the measurement efficiency of optical particle counters and other common aerosol instrumentation. The facility consists of an aerosol generation setup, a turbulent flow tube for particle homogenization, isokinetic sampling ports, and a home-built particle counter that serves as a reference instrument. Stable and reproducible aerosols of polystyrene latex particles can be produced in the size range 100 nm–10 μm and at concentrations between 0.5 cm−3 and a few thousand submicron particles per cm3 or a few tens of 10 µm particles per cm3. The flow characteristics in the homogenizer were investigated with laser Doppler velocimetry measurements and computational fluid dynamics simulations indicating a plug (turbulent) flow at the aerosol sampling location. The particle mixing characteristics were determined experimentally at various heights of the flow tube by parallel measurements with two condensation particle counters. A spatial homogeneity within 1.1% was found across the sampling area. The measurement uncertainties in the determination of the particle number concentration have been evaluated in detail and amount typically to 5.4% at 1 cm−3 and 2.1% at 100 cm−3 (95% confidence level).Keywords
This publication has 27 references indexed in Scilit:
- Monitoring of airborne bacteria and aerosols in different wards of hospitals – Particle counting usefulness in investigation of airborne bacteriaAnnals of Agricultural and Environmental Medicine, 2015
- On the Feasibility of a Number Concentration Calibration Using a Wafer Surface ScannerAerosol Science and Technology, 2014
- Detection and characterization of nanomaterials released in low concentrations during multi-walled carbon nanotube spraying process in a cleanroomInhalation Toxicology, 2013
- Case StudyJournal of Occupational and Environmental Hygiene, 2013
- Dispersion and Exposure to a Cough-Generated Aerosol in a Simulated Medical Examination RoomJournal of Occupational and Environmental Hygiene, 2012
- Real-time monitoring of non-viable airborne particles correlates with airborne colonies and represents an acceptable surrogate for daily assessment of cell-processing cleanroom performanceCytotherapy, 2012
- Performance evaluation of three optical particle counters with an efficient “multimodal” calibration methodJournal of Aerosol Science, 2008
- Calibration of an optical particle counter to provide mass for well-defined particle materialsJournal of Aerosol Science, 2007
- Optical particle counters: Response, resolution and counting efficiencyJournal of Aerosol Science, 1982
- Experimental studies of optical particle countersAtmospheric Environment (1967), 1974