Comparison of Ti/Pt/Au and Ti/Ru/Au contact systems to p-type InGaP
Authors:
- 1 October 1997
- journal article
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 12 (10) , 1298-1303
Abstract
The electrical and metallurgical properties of vacuum-evaporated Ti/Pt/Au and Ti/Ru/Au contacts to moderately doped p-type InGaP and their thermal stability at higher temperatures are reported. Ohmic behaviour and typical contact resistivities of 4 - and 6 - could be obtained only for contacts annealed between 500 and . When subjected to an aging test at for 50 h in , the contacts originally annealed at exhibited good electrical stability and only a minor increase of the specific contact resistance was observed during the first 25 h. SEM observation of surface morphology and SIMS in-depth profile measurements showed that the Ru layer, incorporated between the Ti contact layer and a thick Au top layer, proved to be a more effective and thermally more stable diffusion barrier than the Pt layer. As a result, the standard Ti/Pt/Au contacts were metallurgically stable up to , while the newly proposed Ti/Ru/Au contact scheme exhibited a remarkable stability even after annealing at .Keywords
This publication has 11 references indexed in Scilit:
- Thermal stability and degradation mechanism of WSiN/InGaP Schottky diodesJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1996
- High power aluminium-free InGaAsP/GaAs pumping diode lasersMaterials Science and Engineering: B, 1995
- The role of Ru in improving Schottky and ohmic contacts to InPVacuum, 1995
- TiWN Schottky Contacts to n-Ga0.51In0.49PJapanese Journal of Applied Physics, 1994
- Comparison between ruthenium-based and other ohmic contact systems to p-type GaAsApplied Physics Letters, 1992
- Ohmic contacts ton-type In0.5Ga0.5PJournal of Electronic Materials, 1992
- Hydrogenation of Si- and Be-doped InGaPJournal of Applied Physics, 1990
- Room-temperature continuous-wave operation of a 640 nm AlGaInP visible-light semiconductor laserElectronics Letters, 1987
- Room-temperature cw operation of InGaP/InGaAlP visible light laser diodes on GaAs substrates grown by metalorganic chemical vapor depositionApplied Physics Letters, 1986
- Heterostructure bipolar transistors: What should we build?Journal of Vacuum Science & Technology B, 1983