Investigation of the Rotor Demagnetization Characteristics of Interior PM Synchronous Machines During Fault Conditions
Authors:
- 12 December 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 50 (4) , 2768-2775
Abstract
This paper investigates the transient magnetic behavior of an interior permanent-magnet (IPM) synchronous machine following a large transient current caused by a fault condition. A combination of finite-element (FE) analysis and numerical integration of the machine equations is used to calculate the currents resulting from a symmetrical three-phase short-circuit fault at the machine terminals, including magnetic saturation effects. FE analysis is further used to simulate the magnetic behavior of the machine when subjected to the fault currents, with a particular focus on the propagation of the demagnetizing MMF throughout the conductive laminations as well as the conductive PM material. Eddy currents induced in the laminations and magnet material are shown to impede the progression of the demagnetizing MMF. However, the transient analysis illustrates the manner in which the fault currents ultimately trigger the onset of irreversible demagnetization of significant portions of the rotor magnets in the analyzed machine. The transient demagnetization analysis method is extended to investigate the influence of several key design variables, including machine operating temperature and segmentation of the rotor magnets.Keywords
Funding Information
- Ford Motor Company
This publication has 10 references indexed in Scilit:
- Magnet minimization in IPM-PMASR motor design for wide speed range application2011
- Design, analysis and loss minimization of a fractional-slot concentrated winding IPM machine for traction applications2011
- Faulty Operations of a PM Fractional-Slot Machine With a Dual Three-Phase WindingIEEE Transactions on Industrial Electronics, 2010
- Characteristic analysis of IPM type BLDC motor considering the demagnetization of PM by stator turn fault2010
- Interdependence of Demagnetization, Loading, and Temperature Rise in a Permanent-Magnet Synchronous MotorIEEE Transactions on Magnetics, 2009
- Demagnetization Testing for a Mixed-Grade Dovetail Permanent-Magnet MachineIEEE Transactions on Magnetics, 2009
- Short-circuit analysis of permanent-magnet generators2009
- Analysis of irreversible magnet demagnetization in line-start motors based on the finite-element methodIEEE Transactions on Magnetics, 2003
- Demagnetisation state of permanent magnets in large output power permanent magnet synchronous motor2003
- Fault tolerant permanent magnet machine drives1995