Ammonia Combustion in a Spark-Ignition Engine Supported with Dimethyl Ether
Open Access
Abstract
This paper presents the results of experimental tests with a spark-ignition engine powered using ammonia and DME (dimethyl ether). The tests were carried out on a CFR (cooperative fuel research) engine with a compression ratio of 10 and a rotational speed of 600 rpm. DME was used as a fuel to facilitate the initiation and then accelerate the combustion in the SI (spark-ignition) engine. It turned out that only about 10% of the energy share of DME ensures the correct combustion process. DME has a positive effect on the combustion stages, reduces the ignition delay time, and shortens the combustion duration. Thanks to this, for 18% of the energy share of NH3, the highest engine efficiency (29.8%), the highest value of the average indicated pressure IMEP (712 kPa), and the minimum value of specific energy consumption (12.1 MJ/kWh) were obtained. Even the smallest DME content ensured the high repeatability of IMEP, below the permissible limit of 5%.Keywords
Funding Information
- Ministry of Science and Higher Education of Poland (BS/PB 1-100-301/2023/P)
This publication has 28 references indexed in Scilit:
- First Study on Ammonia Spray Characteristics with a Current GDI Engine InjectorFuels, 2021
- Comprehensive studies on alcohol using port fuel injection facilitated with spark plug engineMaterials Today: Proceedings, 2021
- Hydrogen effects on combustion stability, performance and emission of diesel engineInternational Journal of Hydrogen Energy, 2020
- Experimental study on ammonia/hydrogen/air combustion in spark ignition engine conditionsFuel, 2020
- Premixed ammonia/hydrogen swirl combustion under rich fuel conditions for gas turbines operationInternational Journal of Hydrogen Energy, 2019
- Alcohol and ether as alternative fuels in spark ignition engine: A reviewRenewable and Sustainable Energy Reviews, 2018
- Analysis of the behaviour of a 4-stroke Si engine fuelled with ammonia and hydrogenInternational Journal of Hydrogen Energy, 2013
- Ammonia/hydrogen mixtures in an SI-engine: Engine performance and analysis of a proposed fuel systemFuel, 2011
- A study on an application of a hybrid break-up model for dimethyl ether atomization in a common-rail injection systemProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2009
- Study of combustion and emission characteristics of turbocharged diesel engine fuelled with dimethyletherFrontiers of Energy and Power Engineering in China, 2008