Experimental study on the residual interfacial bonding performance between CFRPs and concrete after high temperatures
Authors:
Open Access
- 4 June 2025
- journal article
- research article
- Published by Springer Nature in Advances in Bridge Engineering
- Vol. 6 (1) , 1-22
Abstract
Carbon fibre reinforced polymer (CFRP) are widely used in bridge reinforcement projects. However, delamination at the CFRP-concrete interface caused by frequent fires significantly impacts structural safety, severely restricting the further and extensive development of CFRP in bridge engineering. In this paper, the sand filling method is used to quantitatively evaluate the roughness of the concrete beam's surface, and the interfacial normal and tangential bonding stresses between CFRPs and concrete after exposure to elevated temperatures were investigated. The strength grade of the concrete, concrete surface roughness and temperature were analysed to explore the behaviour of the CFRP composites. First, before the CFRP sheets were pasted, the concrete interfacial roughness was quantitatively evaluated, and 135 CFRP-concrete interfacial bonding tests were carried out. Then, two bonding models based on an elevated temperature field were proposed. Finally, the interfacial bonding failure mechanism was analysed by scanning electron microscope (SEM). The research results showed that the concrete surface roughness more significantly affects the interfacial bonding stress than does the strength grade of the concrete. The interfacial separation between CFRPs and epoxy resin occurs at 110 °C, and the glass transition temperature (Tg) is the critical factor determining the decrease in the bonding performance of CFRP composites. The two models proposed in this study exhibit high prediction accuracy and certain safety reserves and are applicable to the prediction of CFRP reinforcement design and construction after exposure to high temperatures. These models also have additional potential applications.Keywords
Funding Information
- he National Natural Science Foundation of China (51978501)
- Innovative Research Group Project of the National Natural Science Foundation of China (51774163)
- the Basic Science (Natural Science) Research Project of Higher Education Institutions in Jiangsu Province in China (No. 23KJA560008)
- Jiangsu Province Housing and Construction System Technology Projec (2023ZD046)
- Yangzhou Housing and Construction System Technology Project (2023JH04)
This publication has 24 references indexed in Scilit:
- Interlaminar reinforcement of carbon fiber reinforced polyimide composites using vertically aligned carbon nanotubesComposites Part B: Engineering, 2024
- Bond behaviour at high temperatures between concrete and CFRP or steel strengthening bars applied according to the embedded through-section (ETS) techniqueCement and Concrete Composites, 2024
- High temperature electromagnetic interference shielding of lightweight and flexible ZrC/SiC nanofiber matsChemical Engineering Journal, 2021
- Residual bond behavior between NSM CFRP and concrete at elevated temperaturesConstruction and Building Materials, 2020
- Behaviour of polypropylene fibre-reinforced concrete beam with CFRP reinforcement under elevated temperatureAsian Journal of Civil Engineering, 2020
- Inquiry into bond behavior of CFRP sheets to concrete exposed to elevated temperatures – Experimental & analytical evaluationComposites Part B: Engineering, 2019
- Temperature dependent bond strength model for GFRP laminate externally bonded to heat-damaged concreteConstruction and Building Materials, 2018
- Fire behaviour of FRP-strengthened reinforced concrete structural elements: A state-of-the-art reviewComposites Part B: Engineering, 2015
- Fire behaviour of thermally insulated RC beams strengthened with EBR-CFRP strips: Experimental studyComposite Structures, 2015
- Numerical modelling of the effects of elevated service temperatures on the debonding process of FRP-to-concrete bonded jointsComposites Part B: Engineering, 2015