The Study of Surface Modification 304 Stainless Steel in Simulated PEMFC Environments
Authors:
- 13 December 2012
- journal article
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 608-609, 865-869
Abstract
In order to increase the corrosion resistant and reduce the interfacial contact resistance of the stainless steel, the duplex treatment technology of electroplating Cr and plasma-assisted nitriding process for AISI 304SS is exploited. X-ray diffraction (XRD), scanning electron microscopy (SEM) and the electrochemical tests such as potentiodynamic and potentiostatic polarization in the simulation PEMFC environments are measured. XRD showed that the surface layer of the 540 ° C and 550 ° C were Cr and Cr2N; the 580 °C was the CrN and Cr2N. The nitride sample of the 550 °C could see the closure process of the mesh crack. Compared with the simulated PEMFC anode environment, higher corrosion resistance was showed in the simulated PEMFC cathode environment. The current density of the 540°C, 550°C and 580°C samples were negative at the operating potential -0.1V, which would provide cathodic protection to the metallic bipolar plates. In the simulated cathode environment, the current densities of the three samples were quickly stabilized, the surface quickly formed a stable passive film.Keywords
This publication has 10 references indexed in Scilit:
- Surface diffusion modification AISI 304SS stainless steel as bipolar plate material for proton exchange membrane fuel cellInternational Journal of Hydrogen Energy, 2012
- Corrosion of metal bipolar plates for PEM fuel cells: A reviewInternational Journal of Hydrogen Energy, 2010
- Deposition of gold–titanium and gold–nickel coatings on electropolished 316L stainless steel bipolar plates for proton exchange membrane fuel cellsInternational Journal of Hydrogen Energy, 2010
- Performance of a high Cr and Ni austenitic stainless steel bipolar plates in proton exchange membrane fuel cell working environmentsJournal of Power Sources, 2009
- Effects of niobium and titanium addition and surface treatment on electrical conductivity of 316 stainless steel as bipolar plates for proton-exchange membrane fuel cellsJournal of Power Sources, 2009
- Stainless steels in bipolar plates—Surface resistive properties of corrosion resistant steel grades during current loadsCorrosion Science, 2006
- Microstructure of electroplated hard chromium coatings after plasma nitrocarburizingSurface and Coatings Technology, 2005
- Thermally nitrided stainless steels for polymer electrolyte membrane fuel cell bipolar platesJournal of Power Sources, 2004
- Ferritic stainless steels as bipolar plate material for polymer electrolyte membrane fuel cellsJournal of Power Sources, 2004
- Preferential thermal nitridation to form pin-hole free Cr-nitrides to protect proton exchange membrane fuel cell metallic bipolar platesScripta Materialia, 2004